一、芯片平台 目前市面上移动设备GPU芯片厂商集中在:Qualcomm, ARM,Imagination Technologies 和Vivante这四家,本文分别对四家芯片厂商的型号做详细分析,绝大部分芯片型号都支持OpenCL,仅有少部分非常早期的芯片平台不支持OpenCL,现在市面上已经找不到使用这些旧芯片平台的移动设备。 高通芯片平台对Open CL的支持度 Ima...
可以键入 Tcl for() 循环,设置变量等。 已实现本指南中记录的一些命令 作为 Tcl 脚本,从服务器内部的文件。startup.tcl 历史笔记 Jim-Tcl在2008年春天被引入OpenOCD。2010年秋季, 在OpenOCD 0.5发布之前,OpenOCD改用Jim-Tcl。 作为 Git 子模块,大大简化了 Jim-Tcl 的升级 从 Jim-TCL 中的新功能和错误修复...
The driver uses a signal abstraction to enable Tcl configuration files to define outputs for one or several FTDI GPIO. These outputs can then be controlled using the ftdi set_signal command. Special signal names are reserved for nTRST, nSRST and LED (for blink) so that they, if defined, wi...
command_init() (*command_registrants[i])(cmd_ctx) 2)对于 command_init() 函数,我们略去 Jim 框架的代码,可以看到以下内容: register_commands(context, NULL, command_builtin_handlers); if (Jim_Eval_Named(interp, startup_tcl, "embedded:startup.tcl", 1) == JIM_ERR) { 第一行代码注册一些...
init Initializes configured targets and servers. Changes command mode from CONFIG to EXEC. Unless 'noinit' is called, this command is called automatically at the end of startup. (command valid any time) 初始化配置的目标和服务器。 更改命令模式从 CONFIG 到 EXEC。 除非调用“noinit”,否则此命令...
Use the sdc2fdc Tcl shell command to convert the timing constraints. 执行synplify综合: 代码语言:javascript 代码运行次数:0 运行 AI代码解释 synplify-batch./wujian100_open_200t_3b.prj 由于加了sdc2fdc,所会生成一个FDC_constraints文件; 综合完成,wujian100_open.edf网表和wujian100_open_edif.xdc约束是...
Host in-order profiling CommandQueue successfully created! 2.2.5 创建并编译内核程序 Program 作用说明 这一步通过 OpenCL C 源码字符串或程序二进制两种方式之一创建内核程序 Program。编译 Program 生成二进制,检查编译错误并获取二进制代码。使用二进制代码创建 Program 能显著减少编译时间。 API函数说明 clCreatePr...
target/esp_common: Fixed handling of spaces in file paths ensuring that command arguments are handled properly. Other: target/espressif: DRAM used as the single work area tcl/espressif: Removed alt-workarea-xxx commands. jtag/drivers: SWD bitbang changed to use dedicated gpio foresp_gpiodriver....
command_init() (*command_registrants[i])(cmd_ctx) 2)对于 command_init() 函数,我们略去 Jim 框架的代码,可以看到以下内容: register_commands(context, NULL, command_builtin_handlers); if (Jim_Eval_Named(interp, startup_tcl, "embedded:startup.tcl", 1) == JIM_ERR) { 第一行代码注册一些...
You need a C++ compiler with C++17 support (up-to-date CLANG or GCC is recommended) and some standard tools such as GNU Flex, GNU Bison, and GNU Make. TCL, readline and libffi are optional (seeENABLE_*settings in Makefile). Xdot (graphviz) is used by theshowcommand in yosys to dis...