ntp-service source-interface命令用来指定NTP报文的本地源接口。 undo ntp-service source-interface命令用来取消NTP报文的本地源接口。 缺省情况下,没有指定NTP报文的本地源接口,即根据路由选择NTP报文的源接口。 命令格式 ntp-service [ ipv6 ] source-interface interface-type interface-number undo ntp-service ...
ntp-service source-interface命令用来指定本地发送/接收NTP报文的源接口。 undo ntp-service source-interface命令用来取消本地发送/接收NTP报文的源接口。 缺省情况下,没有指定本地发送/接收NTP报文源接口,即根据路由选择NTP报文的源接口。 命令格式 ntp-service[ipv6]source-interfaceinterface-typeinterface-number ...
This codebase is licensed under the Apache2.0 licensing, however due to the nature of the codebase the open source dependencies may also use a combination ofAGPL,BSD-2,BSD-3,GPL2.0,LGPL,MITandMPLLicensing. We are experimenting with a new tool for running acceptance tests. It's name ispupp...
ntp-service source-interface命令用来指定本地发送NTP报文的源接口。 undo ntp-service source-interface命令用来取消本地发送NTP报文的源接口。 缺省情况下,没有指定本地发送NTP报文源接口,即根据路由选择NTP报文的源接口。 命令格式 ntp-service [ ipv6 ] source-interface { interface-type interface-number | inte...
6 vpn-instance 表1display ntp-service sessions命令输出信息描述 # 查看本地NTP会话的详细信息。 <Huawei>display ntp-service sessions verboseclock source: 172.11.12.1 clock stratum: 1 clock status: configured, master, sane, valid reference clock ID: LOCAL(0) ...
6 vpn-instance 表1display ntp-service sessions命令输出信息描述 # 查看本地NTP会话的详细信息。 <Huawei>display ntp-service sessions verboseclock source: 172.11.12.1 clock stratum: 1 clock status: configured, master, sane, valid reference clock ID: LOCAL(0) ...
source-interface interface-type interface-number 指定主动对等体向被动对等体发送NTP报文时使用的源接口,报文中的源IP地址从该接口获取。 - preference 指定该远端对等体为优先选择的对等体。缺省情况下,远端对等体不是优先的。 - 视图 系统视图 缺省级别 2:配置级 使用指南 应用场景 当网络中设备需要通过对...
May 9, 20174 mins news analysis NIST to security admins: You’ve made passwords too hard May 5, 20175 mins news analysis Free search engine tool hunts down malware-infected computers May 3, 20174 mins news analysis Annual Verizon security report says sloppiness causes most data breaches ...
ntp-service source-interface 命令功能 ntp-service source-interface命令用来指定本地发送/接收NTP报文的源接口。 undo ntp-service source-interface命令用来取消本地发送/接收NTP报文的源接口。 缺省情况下,没有指定本地发送/接收NTP报文源接口,即根据路由选择NTP报文的源接口。
ntp-service source-interface命令功能 ntp-service source-interface命令用来指定本地发送/接收NTP报文的源接口。 undo ntp-service source-interface命令用来取消本地发送/接收NTP报文的源接口。 缺省情况下,没有指定本地发送/接收NTP报文源接口,即根据路由选择NTP报文的源接口。 命令格式 ntp-service [ ipv6 ] ...