4.直接在test1的project點選右鍵選擇build project,然後在rus an Nios II hardware即可以在console print出hello world 5.如果要讓led閃爍的話可以把led燈改成這以下的code就可以讓led累加了 https://ithelp.ithome.com.tw/upload/images/20220201/201451997eA0sNeD5v.png 參考資料:...
step1:用qsys拉好niosii和板子上pl的連結 step2:在eclipse中將switch的address的值assgin給led的address的值 step3:燒上板子以後開關switch就會讓在其上的led也跟著開關 實驗二(使用niosII console輸入值來控制led的明暗) step1:sopcinfo同實驗一,只有.c檔的code要改 step2:燒上板子以後再在console中輸入...
In Cyclone® III devices, the EPCS controller does not automatically assign its output pins to the dedicated configuration pins on the FPGA. Instead, the output pins are exported to the top level design, giving users the flexibility to connect to any EPCS devices. Therefore, in order to use...
Hi, I load the DE2_NIOS_DEVICE_LED.sof programming file. Build and run the project; Plug in the USB cable on the USB device port on the DE2
有網友問到如何在Nios II EDS的console輸入數字控制LED顯示,如輸入0則LEDG0亮,輸入1則LEDG1亮,以此類推。這是一個初學者熟悉Nios II與DE2很好的練習。 硬體部分的Nios II,這已經驅動了DE2上最常用的周邊,很適合初學者學習。 軟體部分 hello_world.c / C ...
Nios II之LED实验(SDRAM+EPCS4配置)———基于DE0开发板 看了很多书,查了很多网上资料,看了黑金FPGA的视频,终于实现了LED的实验,感觉不错!特发此博文 基本的不做黑金视频教程的一样,这里不多说,不过我要说明一个问题,就是EPCS4的配置,网上说了(包括Altera公司的解释),其CycloneIII和CycloneII的EPCS配饰不一样...