step1:用qsys拉好niosii和板子上pl的連結 step2:在軟體中print 出hello_world和控制led閃爍 實作: 第一步: 1.在quartus中打開platform designer的頁面,然後主要用到的ip有五個 (1)nios processor(2)jtag uart(3)onchip_memory(4)system id peripheral(用於自動校驗的一個只讀模塊,用於確保軟件程序與Nios的硬...
去控制板子上的led,還有使用niosII console 去輸入值來操控led顯示。 實驗構想: 實驗一(板子上的switch作為輸入來控制led) step1:用qsys拉好niosii和板子上pl的連結 step2:在eclipse中將switch的address的值assgin給led的address的值 step3:燒上板子以後開關switch就會讓在其上的led也跟著開關 實驗二(使用...
生成的kernel和cycloneII的有点不同,就是多了epcs的四个接口: 一开始还真是不知道该如何来分配器引脚,找了很久,终于找到: In Cyclone® III devices, the EPCS controller does not automatically assign its output pins to the dedicated configuration pins on the FPGA. Instead, the output pins are exporte...
IOWR(LEDG_PIO_BASE, 0, ledg); 將轉換後的ledg透過IOWR() macro寫入LED_PIO_BASE位址,這個位址正是LEDG所在的位址。 或許你會問,為什麼我知道LEDG_PIO_BASE呢? 因為在\DE2_NIOS_Lite_11_led\software\hello_world_0_syslib\Debug\system_description\system.h的265行 #define LEDG_PIO_NAME "/dev/...
Hi, I load the DE2_NIOS_DEVICE_LED.sof programming file. Build and run the project; Plug in the USB cable on the USB device port on the DE2
Nios II之LED实验(SDRAM+EPCS4配置)———基于DE0开发板 看了很多书,查了很多网上资料,看了黑金FPGA的视频,终于实现了LED的实验,感觉不错!特发此博文 基本的不做黑金视频教程的一样,这里不多说,不过我要说明一个问题,就是EPCS4的配置,网上说了(包括Altera公司的解释),其CycloneIII和CycloneII的EPCS配饰不一样...