Assemble the remaining suspension components. NOTE: the rack and pinion mounts will accept both MustangII and later Mustang power rack and pinions. If a later unit is used, an adapter kit will be needed to correctly space out the rack. A rear sump oil pan is required to clear the front ...
a radius to fit the steering rack in small increments. The rear stock crossmember will also need to be trimmed for rack clearance. Assemble the rest of the suspension components . NOTE: This kit requires the use of 2” rack extensions under the boots on both ends of the rack and pinion...
Inside it is a little more difficult as the 5.0 cable has a small end and the ’69 had a large barrel end. I took a piece of small pipe that fit the curve of the connection, made a cross cut and then a vertical cut allowing the cable to slice over and down into a position keepi...
Mustang II front end Tubular upper and lower control arms Power rack and pinion Front sway bar Sub-frame connectors 4-wheel disc brakes 17” front/18” rear Shelby-American Racing wheels Full roller 351 engine -500 HP Trick Flow aluminum heads ...