The multicast-enabled network delivers the CAPWAP multicast packet to each of the APs that have joined the CAPWAP multicast group. The multicast-enabled network uses the normal multicast mechanisms in the routers to replicate the packet along the way, as needed so that the multicast packet reach...
After multicast network management is enabled, you can bind multicast management information bases (MIBs) to the public network instance and enable trap of a specified module. In this way, status of events on a specified protocol is monitored. Currently, the...
In a multicast-enabled network, each network element needs to be secured with multicast-specific security features. These are outlined in this section, for generic router protection. Features that are not required on every router, but only in specific locations in the network, and features that ...
The purpose of IGMP proxy mode is to connect a Windows Server 2003 router to a multicast-enabled IPv4 network, such as the multicast backbone of the IPv4 Internet (MBone), or a private intranet that is using multicast routing protocols, such as DVMRP and PIM. Figure A-7 shows an example...
Minimum0 (multicast enabled) Maximumany nonzero to 0xFFFFFFFF (multicast disabled) Default0 (multicast enabled) Remarks A network'sMulticastDisabledproperty overrides the cluster'sMulticastDisabledproperty for that particular network. Examples The property value portion of aproperty listentry forMulticastDi...
Note: Unicast NLB nodes cannot communicate over an NLB-enabled network adapter in Windows Server 2003. Multicast mode In multicast mode, NLB assigns a layer-2 multicast address to the cluster adapter instead of changing the adapter’s station address. Multicast allows inter-host communication bec...
To enable multicast data to be correctly transmitted on the local physical network, link-layer multicast services must be provided using multicast MAC addresses. The destination address of a multicast data packet is a group with unknown members but not a specific receiver. Therefore, multicast IP ...
MulticastSpoofEnabled指定地址解析协议 (ARP) 流量是否被欺骗,以将虚拟 IP 地址的请求解析为群集的多播媒体访问控制 (MAC) 地址。 此参数仅适用于多播操作模式。 备注:要启用此网络负载均衡设置,必须在要安装的 Windows 映像中启用 NetworkLoadBalancingFullServer 包。 为此,请使用 Windows 系统映像...
More information on vendor articles , https://learn.microsoft.com/en-us/troubleshoot/windows-server/networking/configure-network-to-support-nlb-operation-modehttps://www.cisco.com/c/en/us/support/docs/ip/multicast/116150-configure-Nexus7000-00.html...
Mixed Open Shortest Path First (OSPF) / Multicast Extended OSPF (MOSPF) networks are prone to problems where the OSPF Designated Router (DR) – and by extension the Backup Designated Router (BDR) – must have the multicast extensions to OSPF enabled for any given multicast-enabled network. ...