There are a large number of multicast and broadcast packets on the network. For details about how to check the multicast and broadcast packets on the network, see8. Check whether the remaining buffer resources of the AP are normal. The forwarding module of the AP and the Wi-Fi packet re...
Multicast Network Management Configuration (S, G) Entries Are Not Generated After IGMP SSM Mapping Is Enabled Fault Description An interface is enabled with source-specific multicast (SSM) mapping and IGMP, and is configured with a static SSM mapping policy. The interface has ...
In an IP multicast-enabled intranet, any host can send IP multicast datagrams to any group address, and any host can receive IP multicast datagrams from any group address regardless of its location. To facilitate this capability, the hosts and routers on the intranet must support IP ...
= null) { Console.WriteLine("JITTrackingEnabled is {0}.", dbgAttr.IsJITTrackingEnabled); Console.WriteLine("JITOptimizerDisabled is {0}.", dbgAttr.IsJITOptimizerDisabled); } else Console.WriteLine("The Debuggable attribute " + "could not be retrieved."); } } } } /* * Output: * ...
Slow-peer detection is enabled by default in Cisco IOS XR starting from Release 7.1.2. Slow peers are peers which are slow to receive and process the inbound BGP updates and acknowledge the updates to the sender. If the slow peer is participating in the ...
= null) { Console.WriteLine("JITTrackingEnabled is {0}.", dbgAttr.IsJITTrackingEnabled); Console.WriteLine("JITOptimizerDisabled is {0}.", dbgAttr.IsJITOptimizerDisabled); } else Console.WriteLine("The Debuggable attribute " + "could not be retrieved."); } } } } /* * Output: * ...
Using address families, the operator can create different topologies for different technologies, for example, EVPN, Multicast, and so on. For more information on BGP, see the BGP configuration guide: https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/bgp...
If the counts increase rapidly, a large number of multicast or broadcast packets are sent to the air interface. By default, multicast or broadcast packets are transmitted at a low physical layer rate (11 Mbit/s on the 2.4 GHz band and 6 Mbit/s on the 5 GHz band). Therefore, ...
Fixes an issue in which multicast forwarding is enabled every time that you restart the Routing and Remote Access service. This issue occurs on a computer that is running Windows 7 or Windows Server 2008 R2.
Debug is enabled by default on Serial.You can also change the debugging level from 0 to 4/* Comment this out to disable prints and save space */ #define BLYNK_PRINT Serial #define DEBUG_ETHERNET_WEBSERVER_PORT Serial // Debug Level from 0 to 4 #define _ETHERNET_WEBSERVER_LOGLEVEL_ 1...