-i, --interface 获取当前的 QoS 配置 此参数用于获取当前的 QoS 配置: # mlnx_qos -i eth2 # mlnx_qos -i eth2DCBX mode: OS controlled Priority trust state: dscp dscp2prio mapping: prio:0 dscp:07,06,05,04,03,02,01,00, prio:1 dscp:15,14,13,12,11,10,09,08, prio:2 dscp:23,2...
-i, --interface 获取当前的 QoS 配置 此参数用于获取当前的 QoS 配置: # mlnx_qos -i eth2 # mlnx_qos -i eth2 DCBX mode: OS controlled Priority trust state: dscp dscp2prio mapping: prio:0 dscp:07,06,05,04,03,02,01,00, prio:1 dscp:15,14,13,12,11,10,09,08, prio:2 dscp:23,...
# mlnx_qos -i eth2 -p 0,1,2,3,4,5,6,7 Default mapping: # mlnx_qos -i eth2 PFC configuration: priority 0 1 2 3 4 5 6 7 enabled 0 0 0 1 0 0 0 0 tc: 0 ratelimit: unlimited, tsa: vendor priority: 1 tc: 1 ratelimit: unlimited, tsa: vendor priority: 0 tc: 2 rat...
The python "modules" we have are only actually needed by a single python script: mlnx_qos. Remove the distutils infracstructure and thus the build dependency on python. Remove genetlink.py that is not used. Install the remaining dcbnetlink.py and netlink.py to /usr/share/mlnx-tools/pytho...
The python "modules" we have are only actually needed by a single python script: mlnx_qos. * Remove the distutils infracstructure and thus the build dependency on python. * Remove genetlink.py that is not used. * Install the remaining dcbnetlink.py and netlink.py to /usr/share/mlnx-...
BlueField DPU需要按照 DPU方式安装软件，和ConnectX并不完全一样，DPU需要在ARM上安装操作系统。
The CMA interface supports Service-ID through the notion of port space as a prefix to the port number, which is part of the sockaddr provided to rdma_resolve_add(). The CMA also allows the ULP (like SDP) to propagate a request for a specific QoS-Class. The CMA uses the provided QoS...
人物简介: 一、孙晓伟担任职务:孙晓伟目前担任耒阳市老孙饺子馆法定代表人;二、孙晓伟投资情况:目前孙晓伟投资耒阳市老孙饺子馆最终收益股份为0%;老板履历 图文概览商业履历 任职全景图 投资、任职的关联公司 商业关系图 一图看清商业版图 更新时间:2024-10-24...
【RDMA】mellonx流控配置工具mlnx_qos 前言 参数 -i, --interface 获取当前的 QoS 配置 -f, --pfc 设置端口的PFC -p --prio_tc 将优先级映射到ETC(出口流量类别) -s --tsa , -t -t-cbw ...