-i, --interface 获取当前的 QoS 配置 此参数用于获取当前的 QoS 配置: # mlnx_qos -i eth2 # mlnx_qos -i eth2DCBX mode: OS controlled Priority trust state: dscp dscp2prio mapping: prio:0 dscp:07,06,05,04,03,02,01,00, prio:1 dscp:15,14,13,12,11,10,09,08, prio:2 dscp:23,2...
-i, --interface 获取当前的 QoS 配置 此参数用于获取当前的 QoS 配置: # mlnx_qos -i eth2 AI检测代码解析 # mlnx_qos -i eth2 DCBX mode: OS controlled Priority trust state: dscp dscp2prio mapping: prio:0 dscp:07,06,05,04,03,02,01,00, prio:1 dscp:15,14,13,12,11,10,09,08, pr...
The python "modules" we have are only actually needed by a single python script: mlnx_qos. * Remove the distutils infracstructure and thus the build dependency on python. * Remove genetlink.py that is not used. * Install the remaining dcbnetlink.py and netlink.py to /usr/share/mlnx-...
Keywords: NetDev, PFC, Buffer Size, prio2buffer Workaround: First, configure PFC on all ports, and then perform other needed QoS (i.e., buffer_size or prio2buffer) configurations accordingly. Discovered in Release: 23.04-0.5.3.3 Description: OpenSM may not be started automatically if chk...
Static hostname: worker4 Icon name: computer-server Chassis: server Machine ID: 56fc3d3889fa427091ee490613ed7c91 Boot ID: 16989882503d406ca788a4afbe52f8c9 Operating System: Ubuntu20.04.6 LTS Kernel: Linux5.4.0-26-generic Architecture: x86-64 ...
Workaround: N/A Keywords: ASAP2, mlxdevm, QoS, Group, Scalable Functions, ConnectX-6 Dx Discovered in Release: 5.6-1.0.3.3 Description: On Ubuntu OS, configuring different IP addresses with different subnets to both ports 0 and 1 is currently not supported. When trying to ping from ...
目录 前言 参数 -i, --interface 获取当前的 QoS 配置 -f, --pfc 设置端口的PFC -p --prio_tc 将优先级映射到ETC(出口流量类别) 优先级 linux 驱动程序 加载 重新启动 转载 mob604756ed27a0 2021-06-08 20:32:00 785阅读 2评论 DynamipsGUI 2.3 EN DynamipsGUI 1.6 READMEFunction List1.use dyna...
802.1x 61. QoS 62. RED 63. Modules 64. Modules Description SwitchX®-2 – OpenFlow packet modify action supports VLAN (setting VLAN ID, setting VLAN priority and stripping VLAN header – for QinQ packets). SwitchX®-2 – output can only be set to "flood", "physical port normal",...
Keywords: NetDev, PFC, Buffer Size, prio2buffer Workaround: First, configure PFC on all ports, and then perform other needed QoS (i.e., buffer_size or prio2buffer) configurations accordingly. Discovered in Release: 23.04-0.5.3.3 Description: OpenSM may not be started automatically if chk...
-i, --interface 获取当前的 QoS 配置 -f, --pfc 设置端口的PFC -p --prio_tc 将优先级映射到ETC(出口流量类别) -s --tsa , -t -t-cbw -r --ratelimit 为每个 TC 添加速率限制 ...