Simple trunk and access port configuration, as well as trunk and hybrid port configuration examples can be found in this article -SWOS/CSS326-VLAN-Example. Hosts This table represents dynamically learnt MAC address to port mapping entries. It can contain two kinds of entries: dynamic and static...
整机功耗只有24w ,Ether1支持PoE供电,有一个RJ45的console接口,注意console波特率默认是11500,不是9600。 CRS326-24G-2S+使用的是双系统RouterOS和SWOS,但默认启动是RouterOS,通电启动后,和电脑连接网线,RouterOS系统可以通过winbox管理软件,使用mac地址登录到CRS326,无需用串口线连接配置 进入后,CRS326-24G-2S+默认已...
E.g. vlan-ids=100-115,120,122,128-130. ==Setup examples== ===Port Based VLAN=== * The configuration for CRS3xx switches is described in the [[Manual:Interface/Bridge#VLAN_Example_.231_.28Trunk_and_Access_Ports.29 | Bridge VLAN FIltering]] section. {{ Note | It is possible ...
Template:Mr-arg-table(view source) (protected) Template:Mr-arg-table-end(view source) Template:Mr-arg-table-h(view source) (protected) Template:Note(view source) (protected) Template:Warning(view source) (protected) Return toSwOS/CRS3xx....
←SwOS/Router-On-A-Stick You do not have permission to edit this page, for the following reason: The action you have requested is limited to users in the group:Users. You can view and copy the source of this page. Template used on this page: ...