]#iprouteshowtabledefault]#iprouteshowtable253默认情况下,iprouteshow实际上是查看名为main的表]#ipr...
which allows for the communication between different devices over the Internet. In this article, we will focus on the use of Red Hat Enterprise Linux (RHEL) in configuring IPv6 routes.
只添加 routes。 network: version: 2 ethernets: eth0: dhcp4: true //开启dhcp match: macaddress: 52:54:00:c3:4a:0e //MAC地址 set-name: eth0 //网卡名 routes: - to: default via: "2402:4e00:1018:9a01::1" //设置IPv6网关地址 6.4 执行如下命令,使配置生效。 netplan apply 6.5 执行...
我有一个通过IPv6自动配置广告IPv6地址的网络。为了允许DNS查找并具有漂亮的IP地址,我们通过/etc/ IPv6 /接口设置了“静态”的地址: auto eth0 iface eth0 inet dhcp iface eth0 inet6 static address a:b:c:d:e::f netmask 64 每当我们现在通过IPv6 Linux连接时,都使用IPv6自动配置地址: a:b:c:d:2...
Route manipulates the kernel’s IP routing tables. Its primary use is to set up static routes to specific hosts or networks via an interface after it has been configured with the ifconfig(8) program. When the add or del options are used, route modifies the routing tables. Without these op...
Route manipulates the kernel’s IP routing tables. Its primary use is to set up static routes to specific hosts or networks via an interface after it has been configured with the ifconfig(8) program. When the add or del options are used, route modifies the routing tables. Without these op...
IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME=eno1 UUID=ae0965e7-22b9-45aa-8ec9-3f0a20a85d11 ONBOOT=yes#开启自动启用网络连接IPADDR0=192.168.21.128#设置IP地址PREFIXO0=24#设置子网掩码GATEWAY0=192.168.21.2#设置网关DNS1=8.8.8.8#设置主DNSDNS2=8.8.4.4#设置备DNS:wq!#...
格式:route add default gw {IP-ADDRESS} {INTERFACE-NAME} 用于设置默认路由,其中, 参数{IP-ADDRESS): 用于指定路由器(网关)的IP地址; 参数{INTERFACE-NAME}: 用于指定接口名称,如eth0。使用/sbin/ifconfig -a可以显示所有接口信息。 例:route add default gw mango ...
# ifconfig IFACE(接口名) IP/MASK [up|down] # ifconfig IFACE(接口名) IP netmask NETMASK options: [-]promisc 注意:立即送往内核中的TCP/IP协议栈,并生效; 管理IPv6地址: add addr/prefixlen del addr/prefixlen route命令:路由查看及管理
To view the FRR IP routing table, use the NCLU net show route vrf <vrf-name> command or the vtysh show ip route vrf <vrf-name> command. These commands show all routes, including routes leaked from other VRFs. The following example commands show all routes in VRF turtle, including...