unsignedintkeycodesize;void*keycode;int(*setkeycode)(structinput_dev *dev,conststructinput_keymap_entry *ke, unsignedint*old_keycode);int(*getkeycode)(structinput_dev *dev,structinput_keymap_entry *ke);structff_device *ff;structinput_dev_poller *poller; unsignedintrepeat_key;structtimer_list ti...
void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code) { switch (type) { case EV_KEY: __set_bit(code, dev->keybit);//比如按键,应该对哪些键值的按键进行处理(对于其它按键不予理睬) break; case EV_REL: __set_bit(code, dev->relbit); break; case EV_...
从以上代码可以看出,核心层向内核注册了一个input类(在/sys/class下),并且注册了主设备号为INPUT_MAJOR(13)的字符设备。因此,input子系统的所有设备主设备号都为13,在使用input子系统处理输入设备时就不需要去注册字符设备了,只需要向系统注册一个input_device即可 2.1 注册input_dev 使用input子系统时,需要注册inp...
(1)input设备驱动层:负责具体的硬件设备,将底层的硬件输入转化为统一的事件形式,向input核心层和汇报; *(2)input核心层:连接input设备驱动层与input事件处理层,向下提供驱动层的接口,向上提供事件处理层的接口; *(3)input事件处理层:为不同硬件类型提供了用户访问以及处理接口,将硬件驱动层传来的事件报告给用户程序。
; keyinputdev.inputdev->keybit[BIT_WORD(KEY_0)] |= BIT_MASK(KEY_0); /***/ /***第三种设置事件和事件值的方法***/ keyinputdev.inputdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); input_set_capability(keyinputdev.input, EV_KEY, KEY_0); /***/ /* 注册 input...
2)capability可以作用在进程上(受限),也可以作用在程序文件上,它与sudo不同,sudo只针对用户/程序/文件的概述,即sudo可以配置某个用户可以执行某个命令,可以更改某个文件,而capability是让某个程序拥有某种能力,例如: capability让/tmp/testkill程序可以kill掉其它进程,但它不能mount设备节点到目录,也不能重启系统,因...
;isr = gpio_keys_gpio_isr;irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;} else {... ...}input_set_capability(input, button->type ?: EV_KEY, button->code);/** If platform has specified that the button can be disabled,* we don't want it to share the interrupt line.*/...
内核是操作系统的核心,不幸的是很容易受到攻击。正如Brad Spengler曾经说过的那样,可以将其视为系统上最大,最易受攻击的setuid根二进制文件。因此,对内核进行尽可能多的强化非常重要。 Stable vs LTS内核 Linux内核以两种主要形式发布:稳定和长期支持(LTS)。稳定版本是较新的版本,而LTS发行版本是较老的稳定版本,长...
其次,进入 SUNXI platform devices,选择 sunxi video input (camera csi/mipi isp vipp)driver 和 v4l2 new driver for SUNXI,如下图所示。 图 2-3: Device Drivers 选项配置 最后,sunxi video input (camera csi/mipi isp vipp)driver 目录下的其他选项需要根据实际产品需求进行开关,如:使用闪光灯、...
On the other hand, when reading files whose text encodings are unknown, it can be helpful to use -a or to set LC_ALL='C' in the environment, in order to find more matches even if the matches are unsafe for direct display. -D ACTION, --devices=ACTION If an input file is a ...