struct class_interface是这样的一个结构:它允许class driver在class下有设备添加或移除的时候,调用预先设置好的回调函数(add_dev和remove_dev)。那调用它们做什么呢?想做什么都行(例如修改设备的名称),由具体的class driver实现。 该结构的定义如下: struct class_interface { struct lis
原因1.大括号不匹配
在device_add的最后面有使用到class_interface 1intdevice_add(structdevice *dev)2{3...4if(dev->class) {5mutex_lock(&dev->class->p->mutex);6/*tie the class to the device*/7klist_add_tail(&dev->knode_class,8&dev->class->p->klist_devices);910/*notify any interfaces that the devic...
; struct class_interface就是之前被串在class->p->class_interface上的类接口的结构。用于描述设备类对外的一种接口。node就是class->p->class_interfa 22、ce链表上的节点。class是指向所属class的指针。add_dev()是在有设备添加到所属class时调用的函数。当然,如果class_interface比设备更晚添加到class,也会...
4. 代码实现 - bus_type, device, device_driver, class, class_interface的注册流程 下面依次从bus_type, device, device_driver, class, class_interface的注册流程来详述数据结构之间的关系建立. 1) bus_register drivers/base/bus.c 注释写的非常明确, 首先注册bus中的kobject到内核. ...
class 是指向所属 class 的指针。 add_dev()是在有设备添加到所属 class 时调用的函数。当然,如果 class_interface 比设备 更晚添加到 class,也会补上的。 remove_dev()是在设备删除时调用的。 从结构来看 class_interface 真是太简单了。我们都怀疑其到底有没有用。但往往看起来简 单的内容实际可能更复杂...
void class_interface_unregister(struct class_interface *class_intf); /*一个类可注册多个接口*/ 设定class的好处:设备驱动一般在注册的时候都会调用此类class的一些函数,主要作用就是在sys目录里面创建一些节点,比如cd到/sys/class下面可以看到这一类的设备,与这个相关的就是一些kobjects。当然对于一个新设备,可以注...
发送队列长度,是一个网络接口(interface)参数,可以用ifconfig命令设置。例如,ifconfig eth0 txqueuelen 10。tc命令无法修改该参数值。 3.2 TBF(Token Bucket Filter,令牌桶过滤器) TBF 是一个简单 qdisc,对于没有超过预设速率的流量直接透传,但也能容忍超过预设速率的短时抖动(short bursts in excess of this rate...
Linux中的class驱动是一种特殊的设备驱动模型,用于抽象和统一设备的操作接口,使得上层应用和系统能够以一致的方式与不同的设备交互,而无需关心底层设备的具体实现细节。 ### 基础概念 1. ...
Include the --allow=<class> option when you run the command. For example, to reload the configuration for the management interface described above, run: cumulus@switch:~$ sudo ifreload --allow=mgmt Use the -a option to bring up or down all interfaces with the common ...