原因1.大括号不匹配
structclass_interface{structlist_headnode;structclass*class;int(*add_dev)(structdevice*,structclass_interface*);void(*remove_dev)(structdevice*,structclass_interface*);}; 4. 代码实现 - bus_type, device, device_driver, class, class_interface的注册流程 下面依次从bus_type, device, device_driver,...
struct class_interface是这样的一个结构:它允许class driver在class下有设备添加或移除的时候,调用预先设置好的回调函数(add_dev和remove_dev)。那调用它们做什么呢?想做什么都行(例如修改设备的名称),由具体的class driver实现。 该结构的定义如下: struct class_interface { struct list_head node; struct class ...
在device_add的最后面有使用到class_interface 1intdevice_add(structdevice *dev)2{3...4if(dev->class) {5mutex_lock(&dev->class->p->mutex);6/*tie the class to the device*/7klist_add_tail(&dev->knode_class,8&dev->class->p->klist_devices);910/*notify any interfaces that the devic...
; struct class_interface就是之前被串在class->p->class_interface上的类接口的结构。用于描述设备类对外的一种接口。node就是class->p->class_interfa 22、ce链表上的节点。class是指向所属class的指针。add_dev()是在有设备添加到所属class时调用的函数。当然,如果class_interface比设备更晚添加到class,也会...
void class_interface_unregister(struct class_interface *class_intf); /*一个类可注册多个接口*/ 设定class的好处:设备驱动一般在注册的时候都会调用此类class的一些函数,主要作用就是在sys目录里面创建一些节点,比如cd到/sys/class下面可以看到这一类的设备,与这个相关的就是一些kobjects。当然对于一个新设备,可以注...
发送队列长度,是一个网络接口(interface)参数,可以用ifconfig命令设置。例如,ifconfig eth0 txqueuelen 10。tc命令无法修改该参数值。 3.2 TBF(Token Bucket Filter,令牌桶过滤器) TBF 是一个简单 qdisc,对于没有超过预设速率的流量直接透传,但也能容忍超过预设速率的短时抖动(short bursts in excess of this rate...
net_prio.ifpriomap: 这个文件用于设置 cgroup 中进程的网络优先级映射(interface priority map)。通过配置映射关系,可以将 cgroup 中的进程的网络优先级映射到特定的网络接口(network interface)上。 net_prio.prioidx: 这个文件用于设置 cgroup 中进程的默认网络优先级索引(priority index)。优先级索引是一个整数值...
网卡的驱动其实很简单,它还是与硬件相关,主要是负责收发网络的数据包,它将上层协议传递下来的数据包以特定的媒介访问控制方式进行发送, 并将接收到的数据包传递给上层协议。 网卡设备与字符设备和块设备不同, 网络设备并不对应于/dev目录下的文件,不过会存放在/sys/class/net目录下 ...
[root@localhost ~]# cat /etc/NetworkManager/system-connections/ens1f0np0.nmconnection [connection] id=ens1f0np0 uuid=43f6ff04-fcac-39d9-b21b-008e55ca95c4 type=ethernet autoconnect-priority=-999 interface-name=ens1f0np0 [ethernet] mtu=5500 [ipv4] method=disabled [ipv6] addr-gen-mode=...