R1(config)#ipv6 unicast-routing 在路由器上开启IPV6路由功能 R1(config-if)#ipv6 enable 在接口下启用IPV6,会自动生成一个link-local地址 R1(config-if)#ipv6 address 2001::1/64 指定一个IP地址,配置后会自动生成一个link-local地址 R1(config-if)#ipv6 address FE80:0:0:0:0123:0456:0789:0abc l...
ipv6 address link-local命令用来配置接口的链路本地地址。 命令格式 ipv6 addressipv6-addresslink-local[cga]collision-countcount 参数说明 参数参数说明取值 ipv6-address 指定接口的IPv6地址。 32位16进制数,格式为X:X:X:X:X:X:X:X。在配置链路本地地址时,指定的IPv6地址的前缀必须匹配FE80::/10。
ipv6 address link-local命令用来手动配置指定接口的链路本地地址。 undo ipv6 address link-local命令用来删除接口上手动配置的链路本地地址。 缺省情况下,接口没有配置链路本地地址。 命令格式 ipv6 addressipv6-addresslink-local undo ipv6 addressipv6-addresslink-local ...
bound to the MAC address, although it is common to configure Link-Local addresses using the EUI-64 method (where the MAC address is embedded into the IPv6 address), Link-Local addresses can also be manually configured in the FE80::/10 format with theipv6 address <address> link-local...
For IPv6 site-local addresses (fec0::/10 prefix), the sin6_scope_id member in the sockaddr_in6 structure is a site identifier.An example of a link-local IPv6 address on interface #5 is the following:syntax Copy fe80::208:74ff:feda:625c%5 The following command is available on ...
For IPv6 site-local addresses (fec0::/10 prefix), the sin6_scope_id member in the sockaddr_in6 structure is a site identifier. An example of a link-local IPv6 address on interface #5 is the following: syntax Copy fe80::208:74ff:feda:625c%5 The following command is available ...
is always usable only with an explicit indication of the interface on which it is reachable. We are always considering the link-local address in its entirety, i.e., the complete /128 IPv6 address, as a host address - no subnet IDs or prefixes or any of that stuff. For example: ...
ipv6 address fe80::1 link-local frame-relay map ipv6 fe80::5 105 broadcast frame-relay map ipv6 fe80::2 105 frame-relay map ipv6 fe80::3 105 frame-relay map ipv6 fe80::4 105 R2 interface serial 0/0 ipv6 address fe80::2 link-local frame-relay map ipv6 fe80::5 205 broadc...
ipv6 address link-local //配置接口的链路本地地址 ipv6 address eui-64 //配置接口的EUI-64格式的全球单播地址 ipv6 enable //接口上使能IPv6功能。 ipv6 icmp blackhole unreachable send //使能在匹配IPv6黑洞路由后回应ICMP目的不可达报文的功能。
Install IPv6 on two computers. For more information, see Install IPv6. Use netsh interface ipv6 show interface on Host A to obtain the link-local address and the interface index for the Ethernet interface. For example, the link-local address of Host A is FE80::210:5AFF:FEAA:20A2, ...