The ipv6 address link-local command manually configures a link-local address for a specified interface. The undo ipv6 address link-local command deletes the manually configured link-local address on an interface. By default, no link-local address is configured for an interface. Format ipv6 addr...
The ipv6 address link-local command manually configures a link-local address for a specified interface. The undo ipv6 address link-local command deletes the manually configured link-local address on an interface. By default, no link-local address is configured for an interface. Format ipv6 addr...
to the MAC address, although it is common to configure Link-Local addresses using the EUI-64 method (where the MAC address is embedded into the IPv6 address), Link-Local addresses can also be manually configured in the FE80::/10 format with theipv6 address <address> link-localcommand. ...
IPv6 Address Structure and Classification Composition and Generation Method of an IPv6 Link-Local Address Configuring an IPv6 Link-Local Address Configuration Examples Relevant Information Overview This chapter defines and covers the configuration method, configuration examples, and other information related ...
IPv6 Address Structure and Classification Composition and Generation Method of an IPv6 Link-Local Address Configuring an IPv6 Link-Local Address Configuration Examples Relevant Information Overview This chapter defines and covers the configuration method, configuration examples, and other information related ...
For IPv6 site-local addresses (fec0::/10 prefix), the sin6_scope_id member in the sockaddr_in6 structure is a site identifier.An example of a link-local IPv6 address on interface #5 is the following:syntax Copy fe80::208:74ff:feda:625c%5 The following command is available on ...
For IPv6 site-local addresses (fec0::/10 prefix), the sin6_scope_id member in the sockaddr_in6 structure is a site identifier. An example of a link-local IPv6 address on interface #5 is the following: syntax Copy fe80::208:74ff:feda:625c%5 The following command is available ...
A link-local address is always usable only with an explicit indication of the interface on which it is reachable. We are always considering the link-local address in its entirety, i.e., the complete /128 IPv6 address, as a host address - no subnet IDs or prefixes or any of that stuff...
. . 0x4012a1f8: tcpip_adapter_create_ip6_linklocal_api at C:/esp32/esp-idf/components/tcpip_adapter/tcpip_adapter_lwip.c:1126 netif_ip6_addr_set_state: netif address state being changed netif: IPv6 address 0 of interface st set to FE80::260A:C4FF:FEAE:AA58/0x08 V (2568) ...
You can view your link local address by using netsh interface ipv6 show interface. When you run this command without any additional parameters, a simple list is provided as output:Copy Idx Met MTU State Name --- --- --- --- --- 5 0 1500 Connected Local Area Connection 4 0 1500 ...