1. 手工汇聚的配置交换机SWA的配置如下:SWAlink-aggregation group 1 mode manualSWAinteface Ethernet 1/0/1SWA-Ethernet1/0/1port link-aggregation group 1Can not specify a loopback-detect ion en able port asaggregati on group member!系统提示不能将一个启用了端口环回监测功能的端口加入到链路汇聚组 ...
Link Aggregation in Manual ModeIn manual mode, you must manually create an Eth-Trunk and add member interfaces to the Eth-Trunk. All active links forward data and traffic is evenly load balanced between them. If one active link fails, traffic is load balanced between the remaining active ...
具体涉及到的配置命令如下:[H3C]link-aggregationgroupagg-idmode[manual|static][H3C]interfaceinterface-typeinterface-number[H3C-Ethernet1/0/1]portlink-aggregationgroupagg-id首先,创建一个链路汇聚组并指定其类型为手工汇聚还是静态LACP汇聚,然后将相应的端口加入到汇聚组中。需要注意的是,如果要在两台交换机之间...
link-aggregation load-sharing ignore { destination-ip | destination-mac | destination-port | ethernet-type | ingress-port | ip-protocol | mpls-label1 | mpls-label2 | mpls-label3 | source-ip | source-mac | source-port | vlan-id } * 缺省情况下,未配置缺省聚合负载分担时忽略的字段 11.4 ...
掌握静态LACP(Link Aggregation Control Protocol)模式链路聚合配置方法 二、实验组网 1.组网需求 链路聚合(Link Aggregation)是将一组物理接口捆绑在一起作为一个逻辑接口来增加带宽的一种方法。通过在两台设备之间建立链路聚合组,可以提供更高的通讯带宽和更高的可靠性。链路聚合不仅为设备间通讯提供了冗余保护,而且不...
This document describes how to configure the components for LAN services, including link aggregation groups, VLANs, voice VLANs, MAC address tables, transparent bridging, as well as GVRP, STP/RSTP, and MSTP protocols.
link-aggregation 1，链路聚合link-aggregation # 创建聚合组号为22 的 手工 | 静态 聚合组，<Sysname> system-view [Sysname] link-aggregation group 22 mode manual | static （manual手工聚合组，static静态LACP聚合组）#创建并配置链路聚合组 1，配置模式为manual，服务类型为tunnel。 <Sysname> system-view [...
interfaces # Include files from /etc/network/interfaces.d: source /etc/network/interfaces.d/* auto lo iface lo inet loopback #p0 auto p0 iface p0 inet manual bond-master bond1 # #p1 auto p1 iface p1 inet manual bond-master bond1 #bond1 auto bond1 iface bond1 inet static address ...
Bring the interfaces up. Run: $iplinksetp0 up $iplinksetp4 up $iplinksetbond0 up For OVS configuration, the bond interface is the one that must be added to the OVS bridge (interfaces p0 and p4 should not be added). The PF representor,pf0hpf, must be added to the OVS bridge with...
06-Link Aggregation Configuration89.02 KB Table of Contents Chapter 1 Link Aggregation Overview 1.1 Link Aggregation 1.1.1 LACP 1.1.2 Consistency Considerations for Ports in an Aggregation 1.2 Approaches to Link Aggregation 1.2.1 Manual Link Aggregation ...