需要注意,对于 compatible 属性的所有字符串,都需要写文档以说明其作用,文档添加在 Documentation/devicetree/bindings 2.3 运行时配置 DT能在运行时传输配置数据,如kernel参数,initrd位置。 大部分数据被包含在/chosen节点内,Linux启动时可能看见如下东西 chosen { bootargs = "cons
dtb文件中的内容会被内核组成了device tree,整个tree上由两个数据结构组成:struct device_node和struct property。 structdevice_node{constchar*name; phandle phandle;constchar*full_name;structfwnode_handlefwnode;structproperty*properties;structproperty*deadprops;/* removed properties */structdevice_node*parent;s...
设备树中的每一个节点,都会被转换为device_node结构体 structdevice_node{constchar*name;// 来自节点中的name属性, 如果没有该属性, 则设为"NULL"constchar*type;// 来自节点中的device_type属性, 如果没有该属性, 则设为"NULL"phandle phandle;constchar*full_name;// 节点的名字, node-name[@unit-address...
第二阶段 第二阶段单纯的是将设备树 ABI 文件进行解压缩,由 FDT 变成 EDT,生成相应的 device_node 结点。这个阶段的函数调用栈如下: unflatten_device_tree(); *__unflatten_device_tree() /* First pass, scan for size */ size = unflatten_dt_nodes(blob, NULL, dad, NULL); /* Second pass, do a...
Documentation/devicetree/ 在系统启动过程中,由bootloader将dtb文件加载到内存,并告知linux内核dtb在内存中的首地址(中途可能会对某些节点进行创建或者修改)。内核在start_kernel中会对dtb文件进行解析,并形成对应的device_node和property结构体;至此,dtb文件便完成任务了。
void __iomem *of_iomap(struct device_node *np, int index) 7.透过Device Tree或者设备的中断号,实际上是从.dts中的interrupts属性解析出中断号。若设备使用了多个中断,index指定中断的索引号。 irq_of_parse_and_map 还有一些OF API,这里不一一列举,具体可参考include/linux/of.h头文件。
/** Legacy and FIT format headers used by do_bootm() and do_bootm_<os>()* routines.*/typedef struct bootm_headers {...char *ft_addr; /* flat dev tree address */ulong ft_len; /* length of flat device tree */...} bootm_headers_t; ...
“Device Tree Powered” Bootstrap In an ARM-based device that uses the Device Tree, the bootloader: loads the kernel image and the DTB into memory loads the address of the DTB in registry R2 jumps to the kernel entry point Compilation of the Device Tree Blob ...
##第二阶段第二阶段单纯的是将设备树ABI文件进行解压缩,由FDT变成EDT,生成相应的device_node结点。 这个阶段的函数调用栈如下: unflatten_device_tree(); device_nodes结点如下: device_node创建完成后,kernel创建platform_device时依据这个阶段完成的工作情况进行对应的设备注册,供驱动代码使用。
Uboot的主线代码从v1.1.3开始就支持DT了,其对ARM的支持和kernel对Device Tree的支持是同期完成的,在Uboot中需要在config文件中加入#define CONFIG_OF_LIBFDT配置项即可,当我们将DTB文件在Uboot里加载到内存中后,通过fdt addr 0xnnnnnnnn命令来设置DTB文件对应地址,这样就可以使用fdt resize、fdt print等命令对DTB文...