Keil error: #101: “name“ has already been declared in the current scope解决方法 keil编译时发生一连串#101 error问题 keil编译发生错误 #include<stdio.h>#include<stdlib.h>...// 标头档#define Result_TIMOUT 3#define Result_INTIAL 0#define Result_ERROR 1...//预处理typedefenum{MD_INIT,HARDWAR...
keil编译发生错误#include <stdio.h>#include <stdlib.h>... // 标头档#define Result_TIMOUT 3#define Result_INTIAL 0#define Result_ERROR 1... // 预处理typedef enum{ MD_INIT, HARDWARE_CHECK, F.。
MDK4工程用MDK5打开,编译引起的错误,类似这种 ..\..\..\Libraries\CMSIS\Core\CM3\stm32f10x.h(214): error: #101: "USB_HP_CAN1_TX_IRQn" has already been declared in the current scope 解决方法是: 再次编译,就OK了 OLED 0.96寸显示屏 (STM32 HAL库) 芯片:STM32L452RE 通信方式:IIC 1. ...
MDK4工程用MDK5打开,编译引起的错误,类似这种 ..\..\..\Libraries\CMSIS\Core\CM3\stm32f10x.h(214): error: #101: "USB_HP_CAN1_TX_IRQn" has already been declared in the current scope 解决方法是: 再次编译,就OK了... 关于解决keil4和mdk共存后51不能使用go to definition Of 'XXXXXX'问题...
..\display.h(72): warning: #231-D: declaration is not visible outside of function I got message when I included a header file containing this line: void
This window has more advanced features than the one presented by the ULINK2. The SAM-ICE and J-Link Trace Data window requires the program be stopped to be updated. All other display windows are the same as the ULINK2. Currently, SWV data writes or reads are not supported with J-Link ...
The Cortex-M0+ has two hardware breakpoints. You must stop the program to set/unset breakpoints with P&E. 1. With Hello running, in the hello.c window, locate the line PTD->PSOR |= 1<PSOR |= 1<. 5. counter is a local variable declared at the start of the main() function near...
flag in global scope. In both USB_ReadEP() and USB_WriteEP(), just after the variables are declared, call an "MMC write servicer" function, then call either a totally blank function or putchar(). (these can be done in reverse order, but they must be done right here and you can'...
(59): error: #757: variable "virtual" is not a type name FileHandle.h: virtual ssize_t read(void* buffer, size_t length) = 0; FileHandle.h: ^ FileHandle.h(59): error: #101: "ssize_t" has already been declared in the current scope FileHandle.h: virtual ssize_t read(void* ...
sx1278驱动移植时报错多个"IRQn" has already been declared in the current scope stm32f10x.h和stm32f103xe.h中重复定义了很多个这样的中断向量,为什么会同时调用这两个头文件呢? 原来是在这两个文件中包含的头文件写错了 我使用的单片机芯片为STM32F103RCT6,而要包含的头文件并不是stm32f10x.h 而是stm32f1xx...