这不是IAR软件的问题，而是JLINK使用了盗版的固件，或者说JLINK本事是个几十块买的盗版当用到原厂Segger公司的JLINKV4.58A软件时，就会报告出来这个非法的问题。
安装好IAR和Jflash for arm驱动软件，连接好Jlink，给k60供电，设置好IAR工程，编译下载即可。
I am using SDK9.0, J-Link Lite-Cortex-M, HW: V8.00, DLL: V4.98C But getting this error just in this project when debugging:debug.txt It was working with this project. not sure if this is caused by new SDK upgrade from 8 to 9 or I did anything. Thanks Edit: Added debug screens...
JLINK warning:CPU could not be halted JLINK error:can not read register 0(R0) while CPU is running JLINK error:can not read register 1(R1) while CPU is running JLINK error:can not read register 2(R2) while CPU is running ...参考多位⽹友的帖⼦，原因可能有以下⼏点：1、设置debug...
**JLink Warning: CPU could not be halted ***JLink Error: Can not read register 15 (R15) while CPU is running ***JLink Error: Can not read register 16 (XPSR) while CPU is running ***JLink Error: Can not read register 0 (R0) while CPU is running ...
IAR软件问题JLINK使用盗版固件或者说JLINK本事几十块买盗版用原厂Segger公司JLINKV4.58A软件报告非问题 -
***WARNING: CPU could not be halted*** *** Error: Can not read register 16 (XPSR) while CPU is runningCan not read register 20 (CFBP) while CPU is runningCan not read register 0 (R0) while CPU is runningCan not read register 1 (R1) while CPU is runningCan not read register ...
**JLink Warning: CPU could not be halted ***JLink Error: Can not read register 15 (R15) ...
I am not able to flash my hex file in to PN7642 using J Link segger , when try to flash I am geting error like CPU not halted , please find below log: IDE : MCU EXPRESSO IDE VERSION 11.8 Jlink segger version : V7.92 SEGGER J-Link Commander V7.92l (Compil...