Loopback address The loopback address (0:0:0:0:0:0:0:1 or ::1) is used to identify a loopback interface, enabling a node to send packets to itself. It is equivalent to the IPv4 loopback address of 127.0.0.1. Packets addressed to the loopback address must never be sent on a li...
ipv6 route-staticipv6-address prefix-length interface-typeinterface-number[next-hop-address][permanent|tracktrack-entry-number][preferencepreference][tagtag-value][recursive-lookup][descriptiontext] ipv6 route-staticipv6-address prefix-length{next-hop-address[recursive-lookuphost-route]|vpn-instanced-vp...
Loopback address 00...1 (128 bits) ::1/128 Link-local address 1111111010 FE80::/10 Global unicast address Other forms N/A Multicast address 11111111 FF00::/8 Anycast address Anycast addresses use the unicast address space and have the identical structure of unicast addresses. Un...
Loopback address The loopback address (0:0:0:0:0:0:0:1 or ::1) is used to identify a loopback interface, enabling a node to send packets to itself. It is equivalent to the IPv4 loopback address of 127.0.0.1. Packets addressed to the loopback address must never be sent on a li...
ip cef ! no ip domain lookup ipv6 unicast-routing ! ! interface Loopback0 no ip address ipv6 address 2011:33:33:33::33/128 ipv6 ospf 10 area 0 ! interface Loopback20 no ip address ipv6 address 2020:20:20:20::20/128 ! interface Serial0/0 no ip address ipv6 address 2011:13:...
Loopback address The loopback address (0:0:0:0:0:0:0:1 or ::1) is used to identify a loopback interface, enabling a node to send packets to itself. It is equivalent to the IPv4 loopback address of 127.0.0.1. Packets addressed to the loopback address must never be sent on a li...
! no ip domain lookup ipv6 unicast-routing ipv6 cef ! interface Loopback1 no ip address ipv6 address 1010::1/128 ! ! interface Loopback2 no ip address ipv6 address 2020::1/128 ! interface Serial1/0 no ip address ipv6 address 2011:11:11:11::2/64 serial restart-delay 0 ! !
PE2 learns the IP address of CE1's loopback interface, and an EBGP peer relationship is established between CE1 and PE2 using loopback interface IP addresses. By default, the BGP routes that PE2 learns from CE1 through the EBGP peer connection cannot recurse to VPN remot...
PE2 learns the IP address of CE1's loopback interface, and an EBGP peer relationship is established between CE1 and PE2 using loopback interface IP addresses. By default, the BGP routes that PE2 learns from CE1 through the EBGP peer connection cannot recurse to VPN remote cross routes. ...
如果路由器本身没问题,可以进入下一步,如果不正常,返回bad address之类,说明你可能需要检查前面的步骤是否正确操作,并且你关闭了代理工具,上级没有其他不支持ipv6的路由器,或者你所处环境没有ipv6,可以通过电脑直接插网线接口,稍等检查有无ipv6地址排查。