Loopback address: is 0:0:0:0:0:0:0:1 or ::1 and not assigned to any interface. Similar to the IPv4 loopback address 127.0.0.1, the IPv6 loopback address indicates that a node sends IPv6 packets to itself. Unspecified address (::): can neither be assigned to any node nor functio...
<AR1>display ipv6 interface brief*down: administratively down (l): loopback (s): spoofing Interface Physical Protocol Cellular2/0/0 up up [IPv6 Address] 2408:843E:C00:8E4:2E0:FC20:19:2020 在AR1上执行命令display cellular 2/0/0 all查看5G数据卡的呼叫连接信息,可以看到APN为5gnet、无线...
Managed address configuration:M位默认为0时,收到该RA的主机使用RA中包含的IPv6前缀用于无状态地址自动配置。 使用如下命令,可将该值设置为1,ipv6 nd autoconfig managed-address-flag 当该值为1时,收到该RA的主机将采用有状态自动配置,也就是DHCPv6的方式来获取IPv6地址。 Other Configuration:O位默认为0,表示...
Loopback address The loopback address (0:0:0:0:0:0:0:1 or ::1) is used to identify a loopback interface, enabling a node to send packets to itself. It is equivalent to the IPv4 loopback address of 127.0.0.1. Packets addressed to the loopback address must never be sent on a li...
[CE1-LoopBack0] ipv6 address 1::1/128[CE1-LoopBack0] quit# 配置静态路由,与PE 1建立IPv6连接。[CE1] ipv6 route-static :: 0 serial2/2/0(2) 配置PE 1# 使能IPv6报文转发功能、MPLS和LDP协议。<PE1> system-view[PE1] ipv6[PE1] mpls lsr-id 2.2.2.2...
Loopback address The loopback address (0:0:0:0:0:0:0:1 or ::1) is used to identify a loopback interface, enabling a node to send packets to itself. It is equivalent to the IPv4 loopback address of 127.0.0.1. Packets addressed to the loopback address must never be sent on a li...
· Link-local addresses—Used for communication among link-local nodes for neighbor discovery and stateless autoconfiguration. Packets with link-local source or destination addresses are not forwarded to other links.· A loopback address—0:0:0:0:0:0:0:1 (or ::1). It has the same ...
Loopback address The loopback address (0:0:0:0:0:0:0:1 or ::1) is used to identify a loopback interface, enabling a node to send packets to itself. It is equivalent to the IPv4 loopback address of 127.0.0.1. Packets addressed to the loopback address are never sent on a link o...
Description . . . . . . . . . . . : Microsoft Loopback Adapter Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Autoconfiguration IP Address. . . : 169.254.25.129 ...
Loopback address The loopback address (0:0:0:0:0:0:0:1 or ::1) is used to identify a loopback interface, enabling a node to send packets to itself. It is equivalent to the IPv4 loopback address of 127.0.0.1. Packets addressed to the loopback address must never be sent on a li...