if your USB drive is write-protected, it is in read-only status and you’ll not be allowed to delete or modify files on the USB drive, which can protect the data on your USB. If you need to format a read-only (write-protected) USB drive, you can remove...
As you can't format a write-protected device, your should first fix "the disk is write protected" error and remove write protection from your problematic devices. Here in this part, there are six ways that you can try to remove the write protection from your USB, pen drive, etc., stora...
Before getting straight to how to format a USB drive that doesn't show up, it's better to first understand why this issue occurs in the first place. Well, there are different reasons behind your USB isn't showing up. Some of them are: 1. Connection Problems: Sometimes, the problem is...
This post from MiniTool Software gives a step-by-step guide for how to format USB using CMD, namely the Windows built-in free DiskPart command tool, on Windows 10/8/7. Also read: Unlock the secrets of hard drive data recovery and regain access to your precious files by delving into ...
Instead, you can only read the stored data. In order to format the USB flash drive with the write protection turned on, you’ll need to remove the write protection first. Move to the next section to learn how to format a write-protected USB. Part 2: How to Format Write Protected ...
5) Typeattributes disk clear readonlyand pressEnterto remove its read-only attribute. Step 4. Close CMD and DiskPart When you have entered all the commands above, close the windows of both DiskPart and CMD. Sum up Removing the read-only state from a USB flash drive is crucial to keep ...
How to Change Your Read-Only USB Drive to Writable on Windows 10/11? Fix 1: Check the Physical Switch Some USB drives have a physical write protection switch on the side or button. If yours has this switch, you can try to turn it off. Step 1. Check if your USB drive has a lock...
You can then create and format a partition: createpartitionprimary format fs=ntfs Wait for this to complete—you should now have a fully working and formatted USB flash drive. Check the write-only status of the drive by copying a small file. ...
Step 2: Enter the (Format F:/x) command in the opened command prompt window (where F is the drive letter of the U disk, which can be entered according to your own situation), and press the (Enter) key to run, and then the format will start your USB drive. ...
Disk Utility is a very simple built-in tool for Mac. This tool can format SD cards, hard disks, etc. It is an excellent way to make your drive compatible with Mac. Please read the next detailed steps for formatting USB to exFAT. Step 1. Insert the USB into your Mac. Step 2. Hold...