if your USB drive is write-protected, it is in read-only status and you’ll not be allowed to delete or modify files on the USB drive, which can protect the data on your USB. If you need to format a read-only (write-protected) USB drive, you can remove...
As you can't format a write-protected device, your should first fix "the disk is write protected" error and remove write protection from your problematic devices. Here in this part, there are six ways that you can try to remove the write protection from your USB, pen drive, etc., stora...
Click Start menu, type cmd, right-click Command Prompt to run it as administrator. Then type the following commands to format write-protected USB using CMD. Press Enter after each command. diskpart list disk select disk <disk number> attributes disk clear readonly select disk <disk number> ...
Instead, you can only read the stored data. In order to format the USB flash drive with the write protection turned on, you’ll need to remove the write protection first. Move to the next section to learn how to format a write-protected USB. Part 2: How to Format Write Protected ...
[Error]: Windows Unable to Format USB Drive? The common error "Windows was unable to complete the format" would pop up in Windows when you try to format the card, and then you need check to see whether the disk is connected properly, and make sure the drive is not read-only and try...
Part 1: Why Is My USB Flash Drive Not Showing Up? Part 2: How to Format a USB Drive that Doesn't Show Up?HOT FAQs about USB Drive Not Showing Up Conclusion External Drive Tips 4DDiG Partition Manager FREE DOWNLOAD Have you ever plugged in a USB drive, but your computer doesn't s...
#8: Use Safe Mode to Unlock and Delete Files #9: Format the USB Drive #1: Make Sure That the Files Are Closed But trying any other methods, firstly you need to make sure that the files you are trying to delete is already closed or not currently used. ...
Method 1. Format Read-only Disk to a Recognized File System When USB hard drives, pen drive, floppy disk, SD card, and external hard disks contain un-supported file system types on a Windows computer or a Mac, the device will also shows read-only. So in this case, you can fix...
Step 2: Enter the (Format F:/x) command in the opened command prompt window (where F is the drive letter of the U disk, which can be entered according to your own situation), and press the (Enter) key to run, and then the format will start your USB drive. ...
You can then create and format a partition: createpartitionprimary format fs=ntfs Wait for this to complete—you should now have a fully working and formatted USB flash drive. Check the write-only status of the drive by copying a small file. ...