Step 6: Tinkercad Simulation Circuit and Connections 9 More Images For better understanding I have made a simulation using Tinercad Circuits The circuit used in this robot is very basic, I have connected the positive side of the battery and the LED bulb directly to the battery whereas the ne...
Step 2: Circuit and Program I will begin this project by uploading code to Arduino nano board first, This is very easy all you have to do is connect the nano board to computer via programming cable. Open Arduino IDE and simply copy and paste this below code, Select proper port number an...
In the measurements made and at the RPM range obtained during the field tests, it was possible to conclude that the maximum open circuit voltage obtained does not exceed 25V. The maximum short-circuit current was in the order of 0.7A. The output is not regulated. These voltage and current...
This is the design I came up with for the mini television using TinkerCAD. As you can see, I tried to keep the overall vintage aesthetic even though the hardware inside is far from it. I guess you could say I have created a retro facade. The design consists of six pieces, the front...