LaserMechanical propertiesTensileWearMicrostructureIn order to further improve the service life of H13 steel, bionic laser surface treatment was performed on the surface of H13 steel. The mechanical properties and microstructures of H13 steel processed by bionic laser surface alloying with different ...
H13 Steel Properties High hot-wear resistance and hot tensile strength as well as good toughness, thermal conductivity and insusceptibility to hotcracking. Can be water-cooled to a limited extent. Mechanical Properties: Tensile strength 1550 MPa-2050MPa Yield Strength 1000-1380 MPa Elongation 10%-...
AISI H13 Steel Properties High hot-wear resistance and hot tensile strength as well as good toughness, thermal conductivity and insusceptibility to hotcracking. Can be water-cooled to a limited extent. Mechanical Properties: Tensile strength 1550 MPa-2050MPa Yield Strength 1000-1380 MPa Elongation...
图 10 常规回火和不同温度和时间预回火+600 ℃×120 min回火后H13钢的力学性能 Figure 10. Mechanical properties of H13 steel after conientional tempering and after pre-tempering at different temperatures and times and 600 ℃×120 min tempering: (a) hardness and (b) impact absorption work 在回火过...
The H13 steel for die casting was treated by different temperatures of vacuum quenching, tempering, and secondary tempering to investigate its mechanical properties. Strength, plasticity, hardness, and impact toughness of the H13 hot working die steel for die casting were measured. Microstructure, ...
4. AISI H13 Steel Mechanical Properties Properties Metric Imperial Tensile strength, ultimate (@20°C/68°F, varies with heat treatment) 1200 – 1590 MPa 174000 – 231000 psi Tensile strength, yield (@20°C/68°F, varies with heat treatment) 1000 – 1380 MPa 145000 – 200000 psi Reduction...
H13 Idol Steel printed Wi the Metal X system, air quenched at 1010C and double tempered at 600C • Wrought H13 Heat Treated Wrought H13 too! steel standard from ASM Spedafty Handbook-air quenched at 1010C and double tempered at 600C.Typical Mechanical Properties Standard Markforged As-Sinter...
11. A recent research on hot work tool steel preparation has demonstrated that additive manufacturing of H11 steel by selective laser melting route can enable the steel to achieve attractive mechanical properties comparable to conventional route of production; the micro structure of air hardened steel ...
The mechanical properties and microstructures, in particular precipitation in the AISI H13 steel, quenched and tempered from 773 K to 973 K for different periods, were systematically investigated by scanning electron microscopy, electron backscatter diffraction (EBSD) and transmission electron microscopy (...
译文转载出处:Chang S H , Tang T P , Tai F C . Enhancement of thermal cracking and mechanical properties of H13 tool steel by shot peening treatment[J]. Surface Engineering, 2011, 27(8):581-586.