I've been trying to flash a program from ESP-IDF to the ESP32-CAM via FTDI FT232RL, the behavior is very erratic. Sometimes, the flash is successful, but if I am to do it again, it won't detect the device. Sometimes I have to unplug and replug the YP-05 to be able to flash....
我一直在尝试通过 FTDI FT232RL 将程序从 ESP-IDF 闪存到 ESP32-CAM,这种行为非常不稳定。有时,闪存成功,但如果我再次这样做,它就检测不到设备。有时我必须拔下并重新插入 YP-05 才能闪光。这也适用于成功但未显示输出的“monitor”命令。 我观察到的症状是 YP-05 在第一次“idf.py flash”后无法工作,解决...
Not being one to take such challenges lying down, [Bitluni] has come up with a nice programming board for the ESP32-CAM that you might want to check out. The problem stems from the lack of a USB port on the ESP32-CAM. That design decision leaves users in need of a USB-to-serial...
BRT_AN_024 FT9XX with ESP32 1.0 FT9XX BRT_AN_031 FT90x UART to USB BOMs Memory Bridge 1.0 FT90X BRT_AN_032 FT90x Ethernet LED Control 1.0 FT90X BRT_AN_041 FT90x-MQTT-Application 1.0 FT90X BRT_AN_049 Bridgetek Tape, Reel and Tray Dimension 1.1 FT800Q, FT801Q,FT810Q, ...