Firewalld的富规则,ip段好像只支持掩模形式,例如 firewall-cmd --add-rich-rule="rule family=ipv4 source address=1.1.1.1/24 accept" 问题我如果想加100.0.0.1-100.0.0.3这类相对任意的外网ip段呢? 原来iptables很简单: iptables -A INPUT -p tcp -m iprange --src-range 100.0.0.1-100.0.0.3 --dport...
Firewalld的富规则,ip段好像只支持掩模形式,例如 firewall-cmd --add-rich-rule="rule family=ipv4 source address=1.1.1.1/24 accept" 问题我如果想加100.0.0.1-100.0.0.3这类相对任意的外网ip段呢? 原来iptables很简单: iptables -A INPUT -p tcp -m iprange --src-range 100.0.0.1-100.0.0.3 --dport...
firewall-cmd --zone=public --add-rich-rule="rule family="ipv4" source address="192.168.10.0/24" service name=ssh accept " //zone区域添加一个富规则,允许来自源网段192.168.10.0/24 的数据 firewall-cmd --permanent --zone=public --add-rich-rule="rule family="ipv4" source address="192.168....
1. [root@localhost ~]# firewall-cmd --add-rich-rule='rule family="ipv6" source address="1:2:3:4:6::" service name="radius" log prefix="dns" level="info" limit value="3/m" reject' 2. success 3. [root@localhost ~]# firewall-cmd --add-rich-rule='rule family="ipv6" servi...
address="192.186.7.0/24" drop"--timeout=10# 当用户来源IP地址是10.0.0.1主机,则将用户请求的5555端口转发至后端172.16.1.7的22端口firewall-cmd --add-rich-rule='rule family=ipv4 source address=10.0.0.1 forward-port port=5555 protocol=tcp to-port=22 to-addr=172.16.1.7'未验证:# firewall-cmd ...
` # firewall-cmd --remove-rich-rule ‘rule family=“ipv4” source address=“192.168.0.111/32” drop’`` 3,添加一条富规则,禁止源地址为192.168.0.0/24网段的地址,访问22端口 # firewall-cmd --add-rich-rule 'rule family=ipv4 source address=192.168.0.0/24 port port=22 protocol=tcp reject' ...
(/etc/protocols中的协议名)-s|--source ADDRESS[/mask]...//按数据包的源地址匹配,可使用IP地址、网络地址、主机名、域名-d|--destination ADDRESS[/mask]...//按目标地址匹配,可使用IP地址、网络地址、主机名、域名-i|--in-interface INPUTNAME[ +]//按入站接口(网卡)名匹配,+用于通配。如 eth0,eth...
firewall-cmd --zone=external --permanent\--add-rich-rule='rulefamily="ipv4"sourceaddress="<src...
A source address or address range is either an IP address or a network IP address with a mask for IPv4 or IPv6. For IPv4, the mask can be a network mask or a plain number. For IPv6 the mask is a plain number. The use of host names is not supported. Options in this section ...
firewall-cmd --add-rich-rule='rule family="ipv4" sourceaddress="172.25.0.10" accept' 允许172.25.0.10主机所有连接。 # firewall-cmd --add-rich-rule='rule service name=ftp log limitvalue="1/m" audit accept' 同意新的 IP v4 和 IP v6 连接 FT P ,并使用审核每分钟登录一次。