I have followed the install instructions for ubuntu jammy here (https://dgpu-docs.intel.com/installation-guides/ubuntu/ubuntu-jammy-arc.html) but after switching to the oem kernel some of my other GPUs (AMD working correctly with the regular kernel) and...
and the "System and SDRAM Clocks for DE-series Boards" part which, according to the tutorial, should resolve the timing issues by offsetting the SDRAM's clock. I am 99.9% sure everything is hooked up correctly within QSYS as I have compared the tutorial figure...
"system has a correctly configured FPGA board.\n"; std::cerr << "Run sys_check in the oneAPI root directory to verify.\n"; std::cerr << "If you are targeting the FPGA emulator, compile with " "-DFPGA_EMULATOR.\n"; } std::termi...
1.Driver Rollback: As a temporary workaround, consider rolling back to the driver version 31.0.101.1692, which you've confirmed works correctly with your shader. 2.Check for Updates: Regularly check for driver updates that may resolve this issue. S...
5. Did you check if you have connected the cable between the backplane and the board correctly, because on Intel backplane you dont need to connect the 3 cables altogether (ipmb,ses,sgpio) Check on the board website for the cable management between the board, raid ...
1.Driver Rollback: As a temporary workaround, consider rolling back to the driver version 31.0.101.1692, which you've confirmed works correctly with your shader. 2.Check for Updates: Regularly check for driver updates that may resolve this iss...
1.Driver Rollback: As a temporary workaround, consider rolling back to the driver version 31.0.101.1692, which you've confirmed works correctly with your shader. 2.Check for Updates: Regularly check for driver updates that may resolve this issue...
1.Driver Rollback: As a temporary workaround, consider rolling back to the driver version 31.0.101.1692, which you've confirmed works correctly with your shader. 2.Check for Updates: Regularly check for driver updates that may resolve this...
This is coming a bit late, but I redesigned my PCB and made sure the MSEL pins were connected correctly for Active Serial programming. I also added a connector for AS, to be on the safe side. It works fine this time, so it would seem that i...
As I mentioned in my post I tried already to burn this iso image to CD and DVD-RW (using Brasero) and an USB Stick (using isohybrid and dd) . All variants gave the same error "Failed to load ldlinux.c32" while booting. For furthe...