tensile testingtwinningyield strength/ acoustic emissiontensile testingmagnesium AZ alloysThe present paper deals with the analysis of the deformation behavior of differently extruded magnesium alloys taken from the AZ series. Rods were extruded using indirect and hydrostatic extrusion which results in a ...
In detail, with increasing Aβ phase, AβMTL phase, and A-score, the Aβ load increased showing in general higher levels than the AβN3pEload and the AβpSer8load (Fig.1a-c; Friedman test corrected for multiple testing:p = 0.001). Increased AβpSer8loads were mainly restricted t...
Kainer, Acoustic emission during tensile testing of magnesium AZ alloys, J. Alloys Compd. 378 (2004) 214-219.Bohlen J,Chmelik F,Dobron P,et al.Acoustic emission during tensile testing of magnesium AZ alloys. Journal of Alloys and Compounds . 2004...
GLOSSARY OF TERMS AND DEFINITIONS FOR ACOUSTIC EMISSION TESTING PROCEDURES (NO S/S DOCUMENT)doi:MIL MIL-STD-1945
Acoustic Emission Testing; Springer: Berlin, Germay, 2008. 2. Zitto, M.E.; Piotrkowski, R.; Gallego, A.; Sagasta, F.; Benavent-Climent, A. Damage assessed by wavelet scale bands and b-value in dynamical tests of a reinforced concrete slab monitored with acoustic emission. Mech. Syst...
The cathode fabrication and testing can only be performed in the ultrahigh vacuum environment (~10−6 Pa). The presence of air will lead to the oxidation of the photocathode immediately. So, it is very difficult to obtain the evolution of the composition of the cathode with time. The ...