const int DHT_PIN = 15; //定义一个整形变量,目的是使用GPIO-15来接收来自传感器的数据 DHTesp dhtSensor; //定义一个DHT传感器 //arduino里的setup函数,执行一次 void setup() { Serial.begin(115200); //串口的速率 dhtSensor.setup(DHT_PIN, DHTesp::DHT11);//把DHT11与gpio第15号数字引脚关联。
T&H SensorDHT11温湿度传感器模块单总线通信 PH2.0-3pin接口 深圳市泰贤科技发展有限公司8年 月均发货速度:暂无记录 广东 深圳市福田区 ¥5.20 DHT11温湿度传感器DHT11模块适用于Arduino 深圳市楚创进出口有限公司11年 月均发货速度:暂无记录 广东 深圳市宝安区 ...
DHT11数字温湿度传感器模块 兼容EPS-01S无线WiFi小板 ESP8266 深圳市瑞芯佳电子有限公司1年 月均发货速度:暂无记录 广东 深圳市 ¥2.35成交208条 KY-015单总线数字温湿度传感器DHT11模块电子积木 东莞市智创电子科技有限公司2年 月均发货速度:暂无记录
怎样去编写一个stm32连接DHT11采集当前温湿度数据最近到手的wifi开发板,编写了一个stm32连接DHT11采集当前温湿度数据(为什么不直接使用esp8266的DHT模块直接采集温湿度,因为我发现nodemcu的DHT采集温湿度实在是太不准确了 dfgsdf 2021-11-01 07:24:39
显示为1个设备2个实体,一个设备为对应一个esp8266板子,实体分别为一个湿度一个温度 点击设备就可以看到相关温湿度 添加到仪表盘 查看仪表盘 参考: https://esphome.io/components/sensor/dht.html 获取最新文章:扫一扫右上角的二维码加入“创客智造”公众号 ...
怎样去编写一个stm32连接DHT11采集当前温湿度数据 最近到手的wifi开发板,编写了一个stm32连接DHT11采集当前温湿度数据(为什么不直接使用esp8266的DHT模块直接采集温湿度,因为我发现nodemcu的DHT采集温湿度实在是太不准确了 dfgsdf 2021-11-01 07:24:39 ...
ESP32 GPIO PinComponent GPIO 4 DHT11 Data 3.3V DHT11 VCC GND DHT11 GND 📝 Code The FreeRTOS-based code creates a task that reads temperature and humidity data from the DHT11 sensor and sends it to the Blynk IoT platform. #include <stdio.h> #include "freertos/FreeRTOS.h" #include...
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. See more at https://thingpulse.com */ //dht11温湿度传感器头文件 #include "DHTesp.h" #ifdef ESP32 #pragma message(THIS EXAMPLE IS FOR ESP8266 ONLY!) ...
Setup of Raspberry Pi Humidity Sensor The left pin of the sensor is connected to 3V3 of Pi (pin1), the second sensor pin via apull-upresistor (4.7k – 10kΩ) with a free GPIO of the raspberry (GPIO4, pin7) and the right senior pin comes at GND (Pin6) from the Pi. The second...
2 Re: WDT Reset using DHT11#84534 Bylolo-Tue Nov 12, 2019 6:16 pm I personally got a "similar" issue having a reset after 8sec when readin values from dht 22 on a V1NodeMCU (esp8266). The way I solved it was using the D2 gpio instead of the D1. ...