A series of experimental tests has been carried out to validate the results from the proposed hybrid optimization procedures. Also, a sensitivity analysis based on the results from the analysis of variance was executed to evaluate the influence of the processing parameter and their reciprocal ...
Overall, these findings look promising for reducing or eliminating the springback of Ti6Al4V titanium alloys. 展开 关键词: Ti6Al4V alloy Electropulsing treatment Springback Microstructure evolution Phase transition DOI: 10.1016/j.msea.2023.145188 年份: 2023 ...
Ti-6AL-4V is a type of titanium alloy, having two-phase alloy status. It is famous for its mechanical properties like high specific strength to weight and corrosion resistance. Moreover, it is regularly used for aerospace applications as well as in the military and medical fields [10,11]....
Titanium alloy is widely used in endoprostheses manufacturing because of its high biocompatibility, good wear properties, and corrosion resistance, but such endoprostheses are stiffer than the femur. These problems have raised interest in searching for the best materials and topology for a femoral ...
However, these benchmark mechanical properties are still out of reach for various types of cellular Ti-6Al-4V materials, as detailed in S-Table 1 (S: supplementary) and the reference note [13]. The titanium alloy Ti-6Al-4V (density: 4.43 g/cm3) is chosen here for comparison because it...
Abstract In this study, the strain hardening ability of an α+β titanium alloy (Ti–6Al–4V) was systematically investigated by comparing the tensile properties of different microstructures at room temperature, including the lamellar microstructure, bi-lamellar microstructure, equiaxed microstructure and ...
Titanium alloy is widely used in endoprostheses manufacturing because of its high biocompatibility, good wear properties, and corrosion resistance, but such endoprostheses are stiffer than the femur. These problems have raised interest in searching for the best materials and topology for a femoral ...
Saresh N, Pillai MG, Mathew J (2007) Investigations into the effects of electron beam welding on thick Ti-6Al-4V titanium alloy. J. Mater. Process. Technol. 192–193:83–88 ArticleGoogle Scholar Kohyamaa A, Arata Y, Tomie M, Igata N (1984) Electron Beam Welding of Titanium and Ti...
TC4(Ti-6Al-4V)钛合金具有较高的比强度和比刚度、以及耐热、耐腐蚀等优异的综合性能,在航空航天、汽车船舶、生物医学等许多领域中应用广泛。但是,由于钛及钛合金的化... 吴新强 - 《南京航空航天大学》 被引量: 15发表: 2011年 ZTC4钛合金精铸件电子束焊接接头组织与疲劳行为研究 在四种不同应力水平下对ZTC...
High cycle fatigue (HCF) property of one kind of near alpha titanium alloy named afterTi-600 was investigated at a frequency of 120~130Hz and with a load ratio R of 0.1. The HCF strength for the alloy at ambient temperature was found to ... L Zeng,G Yang,Q Hong,... - Advanced ...