vivado sdk在release模式下调试时总是进disassembly页面而不是c代码界面的处理方法 注1:是release模式下调试时进不了c页面,debug模式下正常。 1. 现象 2. 处理 在工程属性的“debugging”-“debuglevel”中,不要选择none,可以选择如“maximum(-g3)”。注2:现在仍然有,调试模式下,运行后不能停在main函数处的问...
把你认为可疑的变量加上 volatile 试试。 (3) 变量优化:优化程序会根据变量的使用情况优化变量。例如,函数中有一个未被使用的变量,在 Debug 版中它有可能掩盖一个数组越界,而在 Release 版中,这个变量很可能被优化调,此时数组越界会破坏栈中有用的数据。当然,实际的情况会比这复杂得多。与此有关的错误有: ...
没有指定优先级的 printk 语句默认采用的级别是 DEFAULT_MESSAGE_LOGLEVEL,这个宏在文件 kernel/printk.c 中指定为一个整数值。在 Linux 的开发过程中,这个默认的级别值已经有过好几次变化,所以我们建议读者始终指定一个明确的级别。根据日志级别,内核可能会把消息打印到当前控制台上,这个控制台可以是一个字符模式...
Create RAID Volume界面如图3-13所示,具体参数说明如表3-12所示。 图3-13 Create RAID Volume界面 表3-12 Create RAID Volume界面参数 界面参数 功能说明 Create RAID Volume:创建RAID卷的菜单 Name Volume0 :设置待创建的RAID的名称 需要注意的是:创建RAID时,请确保RAID的名称不包含特殊字符。 RAID Level RA...
What does the debug level setting -g3 do for me. I did not see any difference. thanks Translate 0 Kudos Copy link Reply Altera_Forum Honored Contributor II 10-13-2004 07:17 AM 681 Views Hello tns1, Trace is available without an additional license from FS2 for 16 frames ...
/W 设置警告等级(默认 n=1) set warning level (default n=1) /H 最大化外部名称长度 max external name length /J 默认 char 类型是 unsigned default char type is unsigned /nologo 取消显示版权消息 suppress copyright message /WX 将警告视为错误 treat warnings as errors ...
294 0 3 qinglai Level 2 16 May 2024 In response to Jone_Ni CY8CPROTO-040T开发板自带的板载烧录器,应该时kitprog3,如下截图,Debug还得用别的工具吗? Like 292 0 2 Jone_Ni Moderator 19 May 2024 In response to qinglai Hi 用开发板自带的板载烧录器就行, 我复现出你的...
> > in the Google build system by having a higher-level build flag, > > --fission, which would tell the build system to pass -gsplit-dwarf to > > gcc AND look for the .dwo files produced on the side. We simply > > disallowed having the user pass -gsplit-dwarf directly to the...
System => Linux vps92562878 6.12.3-amd64#1SMP PREEMPT_DYNAMIC Debian 6.12.3-1 (2024-12-07) x86_64 Build Date => Dec 10 2024 15:12:34 Build System => Linux vps92562878 6.12.3-amd64#1SMP PREEMPT_DYNAMIC Debian 6.12.3-1 (2024-12-07) x86_64 GNU/Linux Configure Command => './con...
enabled: true Hi@k0nstantinv! First of all, you should usevmagent v1.95.1because it has bugfix for kubernetes service discovery. Can you share an example of service which service scrape should scrape? You should check the labels of the service and the service. Those labels should be equal...