把你认为可疑的变量加上 volatile 试试。 (3) 变量优化:优化程序会根据变量的使用情况优化变量。例如,函数中有一个未被使用的变量,在 Debug 版中它有可能掩盖一个数组越界,而在 Release 版中,这个变量很可能被优化调,此时数组越界会破坏栈中有用的数据。当然,实际的情况会比这复杂得多。与此有关的错误有: ...
注1:是release模式下调试时进不了c页面,debug模式下正常。 1. 现象 2. 处理 在工程属性的“debugging”-“debuglevel”中,不要选择none,可以选择如“maximum(-g3)”。注2:现在仍然有,调试模式下,运行后不能停在main函数处的问题,已经在运行模式中勾选了“ ...
Set and clear breakpoints, which can be conditional, at both the source code level and the assembly code level Examine core files Step through a program, including across function calls Reattach to the executable file after editing and recompiling ...
Create RAID Volume界面如图3-13所示,具体参数说明如表3-12所示。 图3-13 Create RAID Volume界面 表3-12 Create RAID Volume界面参数 界面参数 功能说明 Create RAID Volume:创建RAID卷的菜单 Name Volume0 :设置待创建的RAID的名称 需要注意的是:创建RAID时,请确保RAID的名称不包含特殊字符。 RAID Level RA...
max_input_nesting_level => 128 => 128 max_input_time => -1 => -1 max_input_vars => 2000 => 2000 max_multipart_body_parts => -1 => -1 memory_limit => 160M => 160M open_basedir => no value => no value output_buffering => 0 => 0 ...
/W 设置警告等级(默认 n=1) set warning level (default n=1) /H 最大化外部名称长度 max external name length /J 默认 char 类型是 unsigned default char type is unsigned /nologo 取消显示版权消息 suppress copyright message /WX 将警告视为错误 treat warnings as errors ...
What does the debug level setting -g3 do for me. I did not see any difference. thanks Translate 0 Kudos Copy link Reply Altera_Forum Honored Contributor II 10-13-2004 07:17 AM 681 Views Hello tns1, Trace is available without an additional license from FS2 for 16 frames ...
没有指定优先级的 printk 语句默认采用的级别是 DEFAULT_MESSAGE_LOGLEVEL,这个宏在文件 kernel/printk.c 中指定为一个整数值。在 Linux 的开发过程中,这个默认的级别值已经有过好几次变化,所以我们建议读者始终指定一个明确的级别。根据日志级别,内核可能会把消息打印到当前控制台上,这个控制台可以是一个字符模式...
Also please refer to this KBA : Debugging CCG3PA with a MiniProg3/Miniprog4 - KBA227291 Best Regards, Yatheesh Like 593 0 ChPa_1603671 Level 1 27 Nov 2019 Thanks, that solved my problem. I was able to debug the Code after setting the #d...
JuMu_2531406 Level 1 5 Nov 2019 In response to DheerajK_81 I used a minprog 4.Miniprog4: I Upgraded the device, closed the programmer app, unplugged the device, restarted creator, and still had device thread id error. Miniprog3: Debugging worked like a charm I changed nothing...