The CP210x Manufacturing DLL and Runtime DLL have been updated and must be used with v 6.0 and later of the CP210x Windows VCP Driver. Application Note Software downloads affected are AN144SW.zip, AN205SW.zip and AN223SW.zip. If you are using a 5.x driver and need support you can...
The CP210x Manufacturing DLL and Runtime DLL have been updated and must be used with v 6.0 and later of the CP210x Windows VCP Driver. Application Note Software downloads affected are AN144SW.zip, AN205SW.zip and AN223SW.zip. If you are using a 5.x driver and need support you can...
Even after installing the CP210x Universal Windows Driver (V11.3.0) downloaded from below on Windows 10 (2H22), the driver is not displayed in Device Manager. https://jp.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=downloads Even if you add it ...
Win10(1803)及以上/Win11：CP210x_Universal_Windows_Driver.zip 32位系统运行CP210xVCPInstaller_x86....
Looks like it still uses the default VID and PID value. Have you ever tried to uninstall the VCP driver and then install the stock driver again? Need to install the VCP driverv6.7that supports Windows XP. http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx ...
I had to install the driver recently to connect the ZCU102 board to a computer with no Vivado Installation (that often installs the driver already). I downloaded the driver here:https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers?tab=down...
驱动cp2102 usb to uart bridge controller driver,支持 Windows XP/Server 2003/Vista/7/8/8.1 (v6.7)。
I have a Microsoft Surface Go that is running Windows 10 and can not get the hardware to connect using the cp210x driver for Windows 10. I put it on the machine and it seems to load but gives error code 28. Any help would be greatly appreciated. ...
I have a Microsoft Surface Go that is running Windows 10 and can not get the hardware to connect using the cp210x driver for Windows 10. I put it on the machine and it seems to load but gives error code 28. Any help would be greatly appreciated. ...
设备运行需要使用CP210x USB 至 UART 桥虚拟 COM 端口(VCP)驱动程序作为虚拟 COM 端口,便于 CP210x 产品和主机进行通信。也可使用直接存取驱动器将这些设备连接至主机。 CP210x 发送卡串口驱动程序安装方法 1、将CP210x芯片设备与电脑连接,打开CP210x USB to UART Bridge Driver驱动安装程序,点击【下一步】 ...