# Set the PPP authentication mode to PAP authentication and specify an authentication domain named system. [RouterA] interface serial 1/0/0 [RouterA-Serial1/0/0] ppp authentication-mode pap domain system # Configure the user name and password sent from RouterA to RouterB in PAP authentication...
PAP authentication and CHAP authentication are termination authentication methods and EAP authentication is a kind of relay authentication method. Run: commit The configuration is committed. In the interface view, Run: system-view The system view is displayed. Run: interface interface-type interface-num...
The tasks in this section explain how to implement authentication on a PPP link by using the Password Authentication Protocol (PAP). The tasks use the example that...
: RADIUS authentication is disabled. Port Specifies the access port of the remote RADIUS server. The default port number is 1812. Protocol Specifies the remote authentication protocol. This parameter can be set to PAP or CHAP. NOTE: The value must be the same as the authenticated resource pro...
Double Authentication of PPP Sessions CHAP or PAP Authentication Using MS-CHAP Domain Stripping Named Method Lists for Authentication A named list of authentication methods is first defined before AAA authentication can be configured, and the named list is then a...
Enables CPP authentication. Most Combinet devices support PPP. Cisco routers can communicate over ISDN with these devices by using PPP encapsulation, which supports both routing and fast switching. Cisco 700 and 800 series routers and bridges (formerl...
UnderConstraints, specify theAuthentication Methods. The proxy supports MS-CHAP-v2, EAP, and PAP. Choice 2: Add a new Network Policy with a Client IPv4 Address condition configured to the IP of your proxy. Set theAccess PermissiontoAccess Granted. ...
Using ntlm_auth for PAP authentication may not work on recent versions of Samba and Active Directory. If so, just skip to the next section.Once Samba has been installed on your system, you should edit the smb.conf file, and configure the [global] section to point to your NT server, ...
running into right now is that MS-CHAPv2 authentication does not work. I tried various settings on the "NPS Network Policies" and found out that only "Unencrypted authentication (PAP, SPAP)" seems to work. Any other "Encrypted Authentication" e.g. MS-CHAPv2 or EAP-MSCHAPv2 is NOT ...
Because the ID strings used by PAP and CHAP authentication provide a peer system identification mechanism that solves this problem, PAP or CHAP authentication is required for on- demand connections. The local and remote system ID strings associated with PAP and CHAP authentication typically represent ...