2960Switch(config)#ip default-gateway 172.16.10.1 As you can see the correct answer would be ip default 192.168.12.1 entered on the 2960(config)# prompt. LikeReply asairam4u1 11 years ago ip default-gateway 192.168.12.1 LikeReply tolinrome Edited by Admin February 16, 2020 at 4:27 AM Hi...
This command will use the Wi-Fi interface, set the IP address to 192.168.0.173, set the subnet mask to 255.255.255.0 and set the default gateway to 192.168.0.0. If you want to switch to using an IP address automatically assigned by a DHCP server instead of a static IP address, use the...
DNS Server Information Command Prompt Tricks How to Assign Static Address From Command Prompt How to Configure Automatic Addressing From Command Prompt An Error Occurred While Trying To Share Folder Over a Network. Server Service Not Started How to Open DOS From Any Working Directory...
Open a command shell or DOS prompt. On the command line, enter: pgp --gen-key [user ID] --key-type [key type] --bits [bits #] --passphrase [passphrase] NOTE: Any information that contains spaces must be contained inside quotation marks. See the example below step 3. Press "Ente...
If the host is running, you can check for a return route by viewing the default gateway and local routing table on the destination host. The latency of the response is more than one second. Use the -w option on the ping command to increase the time-out. For example, to allow responses...
Entering the above command sequence results in the following prompt: [context_name]host_name(config-bgp-af-v6)# Syntax [ no ] neighborip_address{ activate | advertisement-intervaladv_time| capability graceful-restart | default-originate [ route-mapmap_name] | distribute-...
Entering the above command sequence results in the following prompt: [local]host_name(config-sgsn-global)# Syntax [ default | no ] dual-address-pdp default Enables dual PDP type address support. no Disables the default behavior so that the SGSN does not honor requests for...
at the command prompt and read the comments in the script file that pops up on screen. For today, we're interested in only one feature of Microsoft.CmdLib: the ability to display data in tabular format.This leads to an obvious question: how do you display data in tabular format? Let's...
You should see the following prompt: SP ->SUNSP0016364A9934 login: 4. Log in to the SP and enter the user name and password. The default user name isroot, and the default password ischangeme. Note -Once you have logged in to the SP as root, change the default password for increased...
Do not use the default kernel naming scheme for the interface name, as it can conflict with the kernel names. So, don’t use "eth[0-9]+" for the interface name. Better name it "bootnet" or "bluesocket". rd.route=<net>/<netmask>:<gateway>[:<interface>] Add a static route with...