The objects of this study were to determine the responses of a cancellous bone site with a closed growth plate (the distal tibial metaphysis, DTM) to ovariectomy (OVX) and OVX plus a prostaglandin E2 (PGE2) treatment, and compare the site's response to previous findings reported for another...
Classification of Growth Plates: Growth plates are areas of tissue nears the ends of long bones that grow as the child grows. Every long bone has a growth plate at each end. Answer and Explanation: Learn more about this topic: Bone Growth, Development & Disorders ...
Spurious signals from irrelevant items such as floating solids can be filtered out, and the processed signal can then be seen on the monitor as a graphic colour image, each colour representing a different reflection. A white line is used for hard surfaces while silt and growths are seen as ...
A closed plate is provided for decorative objects. A protective grid is mounted on the covering with flanges (1, 2). An upper edge is held by a reinforcing leg (3). The device is made up of perforated or air-permeable material (4).JORDAN, RALF...
Pilot heat pump systems have been installed at two former collieries in Yorkshire/Derbyshire, England, to extract heat from mine water. The installations r
A closed plate is provided for decorative objects. A protective grid is mounted on the covering with flanges (1, 2). An upper edge is held by a reinforcing leg (3). The device is made up of perforated or air-permeable material (4).JORDAN RALF...
For non-closed cracks, the compressive stress inhibits crack opening, and therefore, KI should be treated with a sign change to make KI < 0 [18]. In this case, there is no frictional effect between crack planes. For closed cracks, the original crack planes cannot penetrate each other, so...
The TEM image shows that the QDs have a polygonal shape. The red QDs have average particle sizes of 9–12 nm. The average particle size of the red QDs is 10.3 nm. The red QDs exhibit an emission peak at 629 nm and a full width at half-maximum (FWHM) of 39 nm. The ...
Therefore, the damage in the form of a partially closed delamination can be modelled using ESBCs with non-zero stiffnesses 𝜎𝑖2(𝑥1)=𝜅(𝑥1)[𝑢](𝑥1),𝑥1∈[−𝑏;𝑏].σi2(x1)=κ(x1)u(x1),x1∈[−b;b]. (2) Stiffness value 𝜅(𝑥1)κ(x1) is ...