capwap source interface vlanif ``` 这段代码的含义是设置Capwap数据包的源接口为已选的vlanif接口,通过这个命令可以将Capwap数据包的源地址设置为vlanif接口的IP地址。这样,WLC就会使用该接口作为数据包的源地址发送Capwap数据包。 通过以上步骤和代码示例,初学者可以轻松地实现“capwap source interface vlanif”命令...
[AC]interface vlanif 100[AC-Vlanif100]ip address 10.1.1.2 255.255.255.0[AC-Vlanif100]quit[AC]capwap source interface vlanif 100 #在AC上离线导入AP,并将AP加入AP组“ap-group1”中。假设AP的MAC地址为00e0-fc76-e360,并且根据AP的部署位置为AP配置名称,便于从名称上就能够了解AP的部署位置。例如MAC...
Continue? [Y/N]:y [DeviceA] capwap source interface vlanif 100 为确保网络安全,在对端设备上线后,应及时执行命令undo capwap dtls no-auth enable,关闭CAPWAP的DTLS会话使用不认证方式,避免未授权设备接入网络。 一段时间DeviceB正常上线后,去使能CAPWAP的DTLS会话使用不认证方式。 [DeviceA] undo capwap ...
CAPWAP协议将AP的控制面和数据面分离,使得AP的管理和配置更加集中和灵活。 2. “source interface vlanif 100”在CAPWAP配置中的含义 在CAPWAP配置中,“source interface vlanif 100”指定了CAPWAP隧道的源接口为VLAN接口100(Vlanif 100)。这意味着所有通过CAPWAP隧道传输的数据包都将通过VLAN 100进行封装和传输。这个...
如需修改源接口,需要先执行命令undo capwap source interface{loopbackloopback-number|vlanifvlan-id}删除该源接口,才能重新配置。 操作步骤 进入系统视图。 system-view 配置CAPWAP源接口。 capwap source interfacevlanifvlan-id 或者 capwap source interfaceloopbackloopback-number ...
An IP address has been assigned to the specified loopback or VLANIF interface. Precautions A maximum of eight source interfaces can be configured. If SVF is enabled, only one source interface can be configured. When multiple source interfaces are configured, the management VLAN of the APs must...
To change the source interface, run the undo capwap source interface { loopback loopback-number | vlanif vlan-id } command first to delete the source interface. Procedure Enter the system view. system-view Configure the CAPWAP source interface. capwap source interface vlanif vlan-id Or capwap...
hwWlanCapwapSourceInterfaceValue详细描述 OID 节点名称 数据类型 最大访问权限 含义 实现规格 1.3.6.1.4.1.2011.6.139.9.1.1 hwWlanCapwapSourceInterfaceValue Integer32 read-write 当hwWlanCapwapSourceInterfaceMethod设置为vlanif(2)或loopback(3)时,通过该节点标识具体接口编号。 与MIB文件定义一致...
1) When configure “capwap source interface vlanif3030”, the packet processing procedure is as below: packet [capwap header (with AP source ip) + STA source ip] ---> vlanif3030 ---> NAT (ACL with rule of permitting STA source ip can’t match the packet with capwap header with AP ...
[AC]interface vlanif 100[AC-Vlanif100]ip address 10.1.1.2 255.255.255.0[AC-Vlanif100]quit[AC]capwap source interface vlanif 100 #在AC上离线导入AP,并将AP加入AP组“ap-group1”中。假设AP的MAC地址为00e0-fc76-e360,并且根据AP的部署位置为AP配置名称,便于从名称上就能够了解AP的部署位置。例如MAC...