7.将uuid填入klipper配置文件printer.cfg里面 保存配置,重启klipper,大功告成
If you have completed the above and have the canbus uuid of your CAN device in your printer.cfg, then everything else is just a case of setting up the required pins with the toolhead MCU name prefixed to the pin name. Seehttps://www.klipper3d.org/Config_Reference.html#mcu-my_extra_...
7.将uuid填入klipper配置文件printer.cfg里面 保存配置,重启klipper,大功告成