return1;}8 else{ } } return0; return 关键字可以很方便的测试一段代码,而无需“comment out(注释掉)”大段的可能 存在bug的代码。 voidloop(){ //写入漂亮的代码来测试这里。 return; //剩下的功能异常的程序 //return 后的代码永远不会被执行 } 2.10goto 程序将会从程序中已有的标记点开始运行 语法 ...
if (analogRead(0) > 400) { //如果读取0针脚的数据大于400的话 return 1;} //返回1,相当于调用这个函数后得到的值是1 else{ return 0; //返回0,相当于调用这个函数后得到的值是0 } } return关键字可以很方便的测试一段代码,而无需“comment out(注释掉)” 大段的可能存在bug的代码。 void loop()...
writecommand(uint8_t c) //Send an 8 bit command to the TFT examples/320 x 240/TFTwidth(_Matrix/TFT_Matrix.inowritedata(uint8_t d) //Send a 8 bit data value to the TFTreadcommand8(uint8_t cmd_function, uint8_t index) //Read a 8 bit data value from an indexed command registe...
AI代码解释 functiondevice_data_analyze(dev)local t={}local a=0local s=dev:size()--我们定义 一次发送 十个 字节,分别为 温度 湿度--add_val(t,"Temperature",a,dev:bytes(1,5))add_val(t,"Humidity",a,dev:bytes(6,5))dev:response()dev:send("received")returns,to_json(t)end 如果大家对...
}else{//No, either address or words are outside the limits. Set up error response.response.setError(request.getServerID(), request.getFunctionCode(), ILLEGAL_DATA_ADDRESS); }returnresponse; }//FC06: worker do serve Modbus function code 0x06 (READ_HOLD_REGISTER)//0x06 写单个保持寄存器/...
show_string(uint8_t *str, int16_t x, int16_t y, uint8_t csize, uint16_t fc, uint16_t bc, boolean mode) { my_lcd.Set_Text_Mode(mode); my_lcd.Set_Text_Size(csize); my_lcd.Set_Text_colour(fc); my_lcd.Set_Text_Back_colour(bc); my_lcd.Print_String(str, x, y); }...
问使用Arduino串行监视器和嵌套循环与不同的外围设备通信EN一、安装树莓派及arduino开发环境 搭建树莓...
return response; } /* * Name: sendHTTPResponse * Description: Function that sends HTTP 200, HTML UTF-8 response */ void sendHTTPResponse(int connectionId, String content) { // build HTTP response String httpResponse; String httpHeader; ...
http.errorToString(http_code).c_str()); } if (http_code == HTTP_CODE_OK) { String body = http.getString(); return body; } Serial.printf("[HTTP] status code: %d, body: %s\n", http_code, http.getString().c_str()); return String(""); }}base64 encod...
请单击项目右下角的加号图标。将Maze Object(迷宫对象)拖放到“无(对象)”字段。单击右上角的Nofunction下拉菜单,然后选择[MazeScript] > [ReadComplete]。 如果在这里执行程序,应该可以收到来自Arduino的加速度传感器模块数据,并且迷宫应该可以动了。那就试试这部分程序的运行情况吧。然后,该休息一下了!