Bernard, F., Daudeville, L.: Point fixings in annealed and tem- pered glass structures: modeling and optimization of bolted connections. Eng. Struct. 31(4), 946-55 (2009)Bernard, F. and Daudeville, L. (2009). “Point fixings in annealed and tempered glass structures: Modeling and ...
Laminated and Tempered Glass laminated glass is made from two or three pieces of glass with a thin PVB film between each glass and processed with high temperature and high pressure. It can be made from high grade float glass, plated glass, tempered glass and curved...
aTempered glass is produced by heating annealed glass in a furnace to 620℃. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile. 被磨炼的玻璃是通过加热锻炼的玻璃在一个熔炉生产的对620℃。
To analyse the sensitivity to scratching for commercial annealed and thermally tempered glass scratch tests were performed with the Universal Surface Tester. The tests have shown that the crack width strongly depends on the indenter geometry, the used normal load and the type of glass (annealed or...
There is also no real agreement on how strong glass is. There is a concept Euronorm for structural glass that has values for the characteristic strength for annealed, heat-strengthened, fully tempered and chemically toughened glass. There is however no real agreement on the validity of these ...
Transparent substrate is coated with a pile of thin layers, with reflective properties in the infrared and/or in the solar radiation domain. A transparent substrate (1), notably of glass, provided with a pile of thin layers incorporates at least one metal layer (4) with properties in the ...
Shatter resistant laminated glazing for armoured vehicles has sheet of annealed or, thermal or chemically, tempered glass interleaved with a solid resin based layer (2). The glass sheet receiving the impact (1) is 4-10mm thick. The interleaved layer (2) is 1.5-10mm thick. The glass layer ...
Although strength data for glass is available in the handbooks and reference data is given in the building norms such as the NEN 2608, the question is if these results are based on statistically significant sets of data. To determine the strength of glass in bending a large tests series of ...
Veer, F., Louter, C., Bos, F.P.: The strength of annealed, heat- strengthened and fully-tempered float glass. Fatigue Fract. Eng. Mater. Struct. 32(1), 18-25 (2009)F.A. Veer, P.C. Louter, F.P. Bos, The strength of annealed, heat-strengthened and fully tempered float glass,...
annealed glassImpact damage was produced on annealed and on tempered flat glass specimens using a variety of quartz particles and steel ball bearings. Impacts with quartz particles resulted in damage which is typical for sharp indenters, although considerable scatter in the size of sites was present...