SAE AMS-QQ-P-35A-2005 适用范围 本规范涵盖了不同类型的钝化处理以及清洁和除垢耐腐蚀零件、组件、设备和系统的建议、指导和预防措施。 购买 正式版 其他标准 SAE AMS-QQ-P-35A-2005 耐腐蚀钢的钝化处理SAE AMS-R-25988-1998 橡胶 氟硅橡胶 耐油和耐燃料 板材 条材 模制件 和挤压件 ...
SAE AMS-QQ-P-35A-2005 适用范围 本规范涵盖了不同类型的钝化处理以及耐腐蚀部件@组件@设备和系统的清洁和除垢建议@指导和预防措施。目的:本规范涵盖了不锈钢零件的清洁和除锈方法,并概述了奥氏体@铁素体@马氏体和沉淀硬化耐腐蚀钢的最终清洁阶段或钝化处理。工程图纸和规范应注明分类类型(钝化处理),分类类型应...
(724) 776-0790 SAE WEB ADDRESS: AMS-QQ-P-35 SAE AMS-QQ-P-35 1.2.1 Types: Passivation treatments shall be of the following types, as specified (see 6.2). Type II - Medium temperature nitric acid solution with sodium dichromate additive Type VI - Low temperature nitric acid solution Type...
SAE AMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant Steel
AMS-QQ-P-35A SAE AMS-QQ-P-35A - 4 - 3.3 Passivation treatment: Corrosion-resistant steel parts shall be passivated by immersing them in one of the following aqueous solutions (see 6.2) and maintaining them within the temperature ranges and times described below and in Table I. The ...
2005年 SAE AMS-QQ-P-35A-2005 耐腐蚀钢的钝化处理 本规范涵盖了不同类型的钝化处理以及耐腐蚀部件@组件@设备和系统的清洁和除垢建议@指导和预防措施。目的:本规范涵盖了不锈钢零件的清洁和除锈方法,并概述了奥氏体@铁素体@马氏体和沉淀硬化耐腐蚀钢的最终清洁阶段或钝化处理。工程图纸和规范应注明分类类型(钝化...
400 Commonwealth Drive, Warrendale, PA 15096-0001 AEROSPACE MATERIAL SPECIFICATION AMS-QQ-P-35 Issued MAY 1998 Submitted for recognition as an American National Standard Passivation Treatments for Corrosion-Resistant Steel NOTICE This document has been taken directly from U.S. Military Specification QQ-...
钝化按AMS-QQ-P-35，AMS-QQ-P-35是个不锈钢钝化的美国标准。I
5%中性盐雾2小时以上 一般