AMS-QQ-P-35A SAE AMS-QQ-P-35A - 4 - 3.3 Passivation treatment: Corrosion-resistant steel parts shall be passivated by immersing them in one of the following aqueous solutions (see 6.2) and maintaining them within the temperature ranges and times described below and in Table I. The ...
AMS-QQ-P-35PassivationTreatmentsForCorrosion-ResistantSteel分析和总结分析和总结.pdf,SAE Technical Standards Board Rules provide that: “This report is published by SAE to advance the state of technical and engineering sciences. The use of this report is
SAE AMS-QQ-P-35A-2005的标准全文信息,本规范涵盖了不同类型的钝化处理以及耐腐蚀部件@组件@设备和系统的清洁和除垢建议@指导和预防措施。目的:本规范涵盖了不锈钢零件的清洁和除锈方法,并概述了奥氏体@铁素体@马氏体和沉淀硬化耐腐蚀钢的最终清洁阶段或钝化处理。工程图
400 Commonwealth Drive, Warrendale, PA 15096-0001 AEROSPACE MATERIAL SPECIFICATION AMS-QQ-P-35 Issued MAY 1998 Submitted for recognition as an American National Standard Passivation Treatments for Corrosion-Resistant Steel NOTICE This document has been taken directly from U.S. Military Specification QQ-...
SAE AMS-QQ-P-35A-2005的历代版本如下:2005年SAE AMS-QQ-P-35A-2005 耐腐蚀钢的钝化处理本规范涵盖了不同类型的钝化处理以及耐腐蚀部件@组件@设备和系统的清洁和除垢建议@指导和预防措施。目的:本规范涵盖了不锈钢零件的清洁和除锈方法,并概述了奥氏体@铁素体@马氏体和沉淀硬化耐腐蚀钢的最终清洁阶段或钝化...
SAE AMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant Steel
标准规范_SAE_AMS-QQ-P-416_电镀镉.pdf,AEROSPACE AMS-QQ-P-416 REV. C MATERIAL Issued 2000-07 SPECIFICATION Revised 2009-09 Superseding AMS-QQ-P-416B Plating, Cadmium (Electrodeposited) RATIONALE AMS-QQ-P-416C was issued to correct a publishing error relate
Advanced Plating Technologies is an industry leading provider of passivation of stainless steel to ASTM A967, AMS 2700 and QQ-P-35
5%中性盐雾2小时以上 一般