1 x honeycomb working panel 19.68 x 19.68 x 0.87 in (50 x 50 x 2.2 cm) 1 x aluminum panel 19.68 x 19.68 x 0.039 in (50 x 50 x 0.1 cm)Extension KitThe Extension Kit for the D1 Pro 2.0 increases the machine working area to the impressive 936 x 432 mm, which allows for much ...
For cutting, you really need the optionalhoneycomb panel and aluminum sheetunderneath the material to be sliced. This is a special hexagonal metal grill for cutting that enables the laser to go beyond the material without scarring your table. It also features four little magnets to clamp the ma...
but the best ways to avoid smoke damage are to elevate the work piece using something like a honeycomb table or a rack (so that the smoke can escape under it) and to use air assist to blow the smoke out of the way.(This also allows the laser to cut better and keeps the edges from...
Hey Karl here. I am going to be sharing my experience with the xTool D1 Pro 20W. It is a 20W laser cutter/engraver with a 340x390mm working area. It has been heavily reviewed and I will comment on a few points I have not seen spoken about. I join a lot of Facebook ...