xhci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 1 xhci_hcd 0000:03:00.3: Host halt failed, -19 xhci_hcd 0000:03:00.3: can't setup: -19 xhci_hcd 0000:03:00.3: USB bus 1 deregistered xhci_hcd 0000:03:00.3: init 0000:03:00.3 fail, -19 As another test I was...
[ 2.487673] xhci_hcd 0000:01:00.0: can't setup: -110[ 2.491388] xhci_hcd 0000:01:00.0: USB bus 1 deregistered[ 2.495527] xhci_hcd 0000:01:00.0: init 0000:01:00.0 fail, -110[ 2.500202] xhci_hcd: probe of 0000:01:00.0 failed with error -110 When I get lsusb dump, I do not ...
[ 62.436012] xhci-hcd ee000000.usb: can't setup: -11 [ 62.440901] xhci-hcd ee000000.usb: USB bus 3 deregistered [ 62.446361] xhci-hcd: probe of ee000000.usb failed with error -11 To avoid this 60s wait, this patch adds to check the system_state condition and if the system is not...
struct usb_hcd { struct usb_bus bus; // USB总线结构体 struct device *self; // 指向主控制器设备的指针 struct usb_host_config *host_config; // 指向主机配置的指针 struct list_head root_hub; // 根集线器的设备列表 struct usb_hcd *next; // 指向下一个HCD的指针 spinlock_t lock; // 自...
Some dev Proxmox fix is still needed but I'm running the free community license so I can't complain That is the wrong answer Early 8.2.x Proxmox Versions had a big issue with the 6.8.x kernel.I begged here in the forums for help, to setup a custom kernel for proxmox. There are...
我试着用三星scx-4200进行扫描,这是一台带有扫描仪的打印机。当我连接我弟弟的笔记本电脑,它有相同版本的ubuntu(14.04),它可以工作。我不知道怎么做和为什么。他没有安装任何扫描软件。我还尝试了另一台带有初级操作系统的计算机,它也能工作。现在事情变得很奇怪了!我试着在我和哥哥的笔记本电脑上运行许多来自现场...
debug("Can't get the XHCI register base address\n");return-ENXIO; } priv->ctx.hcd = (struct xhci_hccr *)priv->hcd_base; priv->ctx.dwc3_reg = (struct dwc3 *)((char*)(priv->hcd_base) + DWC3_REG_OFFSET); fsl_apply_xhci_errata(); ...
Please enable CONFIG_USB_XHCI_HCD_DEBUGGING and turn off CONFIG_USB_STORAGE_DEBUGGING, and repost your dmesg. There are a couple commands failing, but without the xHCI debugging on I can't see why. I've recompiled per your request and uploaded the resultant dmesg ...
physical id: 1 bus info: usb@1:1 version: 4.21 capabilities: usb-2.10 configuration: driver=hub maxpower=100mA slots=4 speed=480Mbit/s *-usbhost:1 product: xHCI Host Controller vendor: Linux 5.15.32-v8+ xhci-hcd physical id: 1 bus info: usb@2 logical name: usb2 version: 5.15 ...
The xhci_pci was intentional: even though it shows xhci_hcd, the kernel driver is xhci_pci. Are you sure you can split the options vfio-pci ids=... over two lines? I only use one with all IDs. EDIT: It is quite possible that this won't help and you need a different...