sst_update = 1, tmn_update = 1, sst_skin = 1, bucket_mm = 100.0, bucket_J = 1.e9, ptop_requested = 1000, e_vert = 51, spec_bdy_width = 10, spec_zone = 1, relax_zone = 9, spec_exp = 0.33, 5.检查输出 6.故障排除 7.物理和动力学选项 WRF提供多种物理选项,可以以任何方式...
sst_update =1 auxinput4_inname = "wrflowinp_d" auxinput4_interval = 360, 360, 360 24.If my input data do not have SKINTEMP, what field can I use to avoid the 'mandatory SKINTEMP not found' error - 如果我的输入数据没有 SKINTEMP,我可以使用什么字段来避免“强制 SKINTEMP 未找到”错...
cudt = 5, sst_update = 1, tmn_update = 1, sst_skin = 1, bucket_mm = 100.0, bucket_J = 1.e9, ptop_requested = 1000, e_vert = 51, spec_bdy_width = 10, spec_zone = 1, relax_zone = 9, spec_exp = 0.33, Check Output Once a model run is completed, it is good practice...
SST | K | Sea Surface Temperature | 1| 1 | 0 | |PSFC | Pa | Surface Pressure | 2 | 102 | 0 | | PMSL | Pa | Sea-level Pressure | 7 | 1 | 0 | | HGT | m | Height | Terrain Height 211 | 1 | 0 | | SKINTEMP | K |Skintemperature (can use for SST also) | 229 ...
00"></stream> After having run MPAS with a suitable output stream defined, a set of netCDF files containing fields on the native MPAS mesh will have been produced. Because these files do not contain fields describing
</stream> 在使用定义的适当输出流运行MPAS之后,将生成一组netCDF文件,其中包含本机MPAS网格上的变量。由于这些文件不包含描述MPAS网格单元位置、几何结构和连接性的变量场,因此必须使用MPAS模拟中的“静态”文件将此信息提供给metgrid程序。因此,有必要在&metgrid namelist记录中指定MPAS netCDF文件(前缀为“...
SST:description="SEA SURFACE TEMPERATURE"; SST:units="K"; 海表温度 float QNDROPSOURCE(Time, bottom_top, south_north, west_east); QNDROPSOURCE:description="Droplet number source"; QNDROPSOURCE:units= "/kg/s"; ? float MAPFAC_M(Time, south_north, west_east); MAPFAC_M:description="Map...
module_sf_sstskin.F module_sf_temfsfclay.F module_sf_tmnupdate.F module_sf_urban.F module_shallowcu_driver.F module_shcu_camuwshcu.F module_shcu_camuwshcu_driver.F module_shcu_deng.F module_shcu_grims.F module_shcu_nscv.F module_surface_driver.F module_wind_fitch.F rrtmg_...
Figure 6 shows the average at day and night time of the surface skin temperature (SST), turbulent kinetic energy (TKE) and PBL depth for the different seasons of the year, which is only considering the QNSE PBL scheme due to this scheme showed the best representation of wind speed and ot...
SST:description="SEA SURFACE TEMPERATURE"; SST:units="K"; 海表温度 float QNDROPSOURCE(Time, bottom_top, south_north, west_east); QNDROPSOURCE:description="Droplet number source"; QNDROPSOURCE:units= "/kg/s"; ? float MAPFAC_M(Time, south_north, west_east); MAPFAC_M:description="Map...