CTRL-EVENT-CONNECTED: 当与 AP 成功建立连接时触发。 CTRL-EVENT-DISCONNECTED: 当与 AP 断开连接时触发。 CTRL-EVENT-SCAN-RESULTS: 当扫描结果可用时触发。 CTRL-EVENT-TERMINATING: 当 wpa_supplicant 终止时触发。 CTRL-EVENT-BSS-ADDED: 当一个新的 BSS(基本服务集)被添加到扫描结果中时触发。 CTRL-EVENT...
03-16 09:22:12.440 D/WifiMonitor( 924): Event [IFNAME=wlan0 CTRL-EVENT-DISCONNECTED bssid=08:cc:68:9e:ac:20 reason=3 locally_generated=1]03-16 09:22:16.596 I/wpa_supplicant(23065): wlan0: CTRL-EVENT-ASSOC-REJECT bssid=0e:bd:51:c7:b6:33 status_code=1 2 在4WAY...
<3>CTRL-EVENT-ASSOC-REJECT status_code=1<3>CTRL-EVENT-STATE-CHANGEid=1state=0BSSID=00:00:00:00:00:00SSID=AirFly<3>CTRL-EVENT-ASSOC-REJECT status_code=1<3>CTRL-EVENT-STATE-CHANGEid=-1state=3BSSID=00:00:00:00:00:00SSID= <3>CTRL-EVENT-SCAN-RESULTS<3>WPS-AP-AVAILABLE<3>Trying to...
<2>CTRL-EVENT-DISCONNECTED bssid=00:00:00:00:00:00 reason=0 > rtl8192c_set_FwJoinBssReport_cmd mstatus(0) <2>CTRL-EVENT-BSS-REMOVED 0 84:c9:b2:88:0c:f2 > status wpa_state=DISCONNECTED ip_address=192.168.0.101 > terminate OK > (2)871x_drv - drv_close, bup=1, hw_init_compl...
ath0_wlan1: CTRL-EVENT-DISCONNECTED bssid=xx:xx:xx:xx:xx:xx reason=0 ath0_wlan1: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=9) ath0_wlan1: Setting scan request: 0.100000 sec Added BSSID xx:xx:xx:xx:xx:xx into blacklist ...
<2>CTRL-EVENT-BSS-REMOVED 0 84:c9:b2:88:0c:f2 >status wpa_state=DISCONNECTED ip_address=192.168.0.101 >terminate OK > (2)871x_drv - drv_close, bup=1, hw_init_completed=1 -871x_drv - drv_close, bup=1 rtl8192c_set_FwJoinBssReport_cmd mstatus(0) 'PING' command failed. Connec...
<2>CTRL-EVENT-BSS-REMOVED 0 84:c9:b2:88:0c:f2 > status wpa_state=DISCONNECTED ip_address=192.168.0.101 > terminate OK > (2)871x_drv - drv_close, bup=1, hw_init_completed=1 -871x_drv - drv_close, bup=1 rtl8192c_set_FwJoinBssReport_cmd mstatus(0) ...
wpa_state=DISCONNECTED 用下面的命令增加网络,并设置相应的参数 add_network 该命令会返回新增加的网络的ID,一般是0 。下面的命令的第一个参数就是网络的ID。 set_network 0 ssid "wyk" wyk是无线网络名称,要用引号围起来。 set_network 0 psk "password" ...
"DISCONNECTED" depending on the event. This can be used to execute networking tools required to configure the interface.#Additionally, three environmental variables are available to the file: WPA_CTRL_DIR, WPA_ID, and WPA_ID_STR. WPA_CTRL_DIR contains the absolute path to the ctrl_interface ...
<2>CTRL-EVENT-BSS-REMOVED 0 84:c9:b2:88:0c:f2 > status wpa_state=DISCONNECTED ip_address=192.168.0.101 > terminate OK > (2)871x_drv - drv_close, bup=1, hw_init_completed=1 -871x_drv - drv_close, bup=1 rtl8192c_set_FwJoinBssReport_cmd mstatus(0) 'PING' command failed. Co...