Firewall logs show only connections to pfsense:53, to visited sites in the internet but no connections to local services in my home lan. I can't see any blocked packets of the attempt to connect . There are no states visible between any local service and the client. ...
A publicly reachable peer/node that serves as a fallback to relay traffic for other VPN peers behind NATs. A bounce server is not a special type of server, it's a normal peer just like all the others, the only difference is that it has a public IP and has kernel-level IP forwarding...
purely for convenience on my local network, I set up the DNS assignmentpivpn.geerli.neton the Pi-hole that runs DNS on my home network (geerli.netis a domain I purchased and use only for devices on my home network).
Defines the VPN settings for the local node.ExamplesNode is a client that only routes traffic for itself and only exposes one IP [Interface] # Name = phone.example-vpn.dev Address = 192.0.2.5/32 PrivateKey = <private key for phone.example-vpn.dev>...
instead of the expected behavior of having only traffic for that IP block going through the tunnel and all other traffic being normal (so you can access your LAN or use your local Internet instead of internet being tunneled). Simply, I don't want ALL traffic to be tunneled and with WireG...
This protocol is beneficial for voice and video traffic. Does WireGuard Provide Good Security? Yes, WireGuard provides security equal to the Open VPN protocol; the only glitch it faces is the IP address assignment, but many VPNs out there overcome this issue by applying different techniques. ...
This won't work as we need to block access for HTTP proxy not the wireguard. At the time of writing this, I realized I have also opened up the wireguard port too which shouldn't be there as you should only allow traffic over the HTTP proxy. Or you can say it's not a bug it's...
tunnel. Outgoing packets will be sent to the peer whoseAllowed IPs contain the destination address, and for multiple matches, the longest matching prefix is chosen. Incoming packets are only accepted if traffic to their source IP would be sent to the same peer. May be specified multiple times...
destination system has an IP address in either range. Using theAllowedIPsdirective, you can restrict the VPN on the peer to only connect to other peers and services on the VPN, or you can configure the setting to tunnel all traffic over the VPN and use the WireGuard Server as a gateway....
Also from site A /Site B, I'm able to ping the local LAN. But, I'm able to ping from the local LAN to site A only not Site B. I suspect the managed switch on Site-B, do I have to allow the incoming traffic on pfsense from this negear switch(GS724TPS). If yes, how do ...